Bedienungsanleitung Black Decker CV1205 TH1 (Seite 6 von 12) (Englisch)

582810

Zoom out

Zoom in

Vorherige Seite

1/12

Nächste Seite

2. Release button

3. Dust bowl

4. Charging base

5. Filter cleaning wheel (CV9605/CV1205)

6. Charging indicator

Fig. A

7. Crevice tool

8. Brush tool

Installation

Fitting the charging base to the wall

(fig. B)

The charging base can be placed on a

worktop or fitted to the wall to provide a

convenient storage and charging point for

the appliance.

Assembly

Fitting the accessories (fig. A & C)

These models are supplied with the

following accessories:

- a crevice tool (7) for confined spaces

- a brush tool (8) for furniture and stairs

To fit an accessory, proceed as follows:

◆ Take the accessories from the

appliance.

◆ Insert the appropriate accessory into

the front of the appliance.

Use

◆ Before first use, the battery must be

charged for at least 16 hours.

◆ Place the appliance on the charging

base whenever it is not in use.

Charging the battery (fig. B)

◆ Make sure that the appliance is

switched off. The battery will not be

charged with the on/off switch in the

on position.

◆ Place the appliance on the charging

base as shown.

◆

Plug in the charger. Switch on at the

mains.

The charging indicator (6) will be lit.

◆ Leave the appliance to charge for at

least 16 hours.

Whilst charging, the charger may become

warm. This is normal and does not

indicate a problem. The appliance can be

left connected to the charger indefinitely.

The charging indicator will be lit as long

as the appliance is connected to the

plugged-in charger.

Warning! Do not charge the battery at

ambient temperatures below 4 °C or

above 40 °C.

Switching on and off (fig. D)

◆ To switch the appliance on, slide the

on/off switch (1) forward.

◆ To switch the appliance off, slide the

on/off switch back.

CV9605/CV1205 - Optimising the

suction force (fig. E)

In order to keep the suction force

optimised, the filter must be cleared

regularly during use.

◆ Rotate the wheel (5) a few turns to

shake out dust clogging the filter (9).

Cleaning and maintenance

Warning! Regularly clean the filters.

Cleaning the dust bowl and filters

(fig. F - I)

The filters are re-usable and should be

cleaned regularly.

◆ Press the release button (2) and

remove the dust bowl (3) (fig. F).

◆ Empty the dust bowl (fig. G).

◆ Remove the filters (9 & 10) by

twisting them clockwise (fig. H).

◆ Brush any loose dust off the filters.

◆ Wash the filters in warm, soapy

water (fig. I). The bowl can also be

washed if necessary. Do not immerse

the appliance in water (fig. J).

◆ Make sure the dust bowl and filters

are dry.

◆ Refit the filters (9 & 10) onto the

appliance, twisting them

counterclockwise until they lock into

place.

◆ Refit the dust bowl onto the

appliance. Make sure the dust bowl

clicks into place.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Black Decker CV1205 TH1 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Black Decker CV1205 TH1

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info