Bedienungsanleitung Black Decker dv 9605 tn (Seite 9 von 96) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

321312

Zoom out

Zoom in

Vorherige Seite

1/96

Nächste Seite

ENGLISH

Use

 Before first use, the battery must be

charged for at least 24 hours.

 Place the appliance on the charging

base whenever it is not in use.

Charging the battery (fig. C)

Before charging the battery:

 Make sure that the appliance is

switched off. The battery will not be

charged with the on/off switch (3) in

the on position.

 Place the appliance on the charging

base (6) as shown.

 Plug in the charger. Switch on at the

mains.

The charging indicator (4) will be lit.

 Leave the appliance to charge for at

least 24 hours.

While charging, the charger may become

warm. This is normal and does not

indicate a problem. The appliance can be

left connected to the charger indefinitely.

The charging indicator (4) will be lit as

long as the appliance is connected to the

plugged-in charger.

Warning! Do not charge the battery at

ambient temperatures below 10°C or

above 40°C.

Switching on and off (fig. D)

 To switch the appliance on, slide the

on/off switch (3) forward.

 To switch the appliance off, slide the

on/off switch (3) back.

Optimising the suction force (fig. E)

In order to keep the suction force

optimised, the filters must be cleared

regularly during use.

 Slide the filter cleaning button (5) up

and down a few times to shake out

dust clogging the filters (10 & 11).

Cleaning and maintenance

Warning! Regularly clean the filters (10

& 11).

Cleaning the brush head

 Remove any hair or other debris that

is wrapped around or is trapped near

the brush bar to make sure that it can

rotate freely. Use a pair of scissors if

necessary.

Cleaning the dust collector and filters

(fig. F - I)

The filters are re-usable and should be

cleaned regularly.

 Press the release button (2) and

remove the dust collector (1).

 Empty the dust collector (1) (fig. G).

 Remove the filters (10 & 11) by

twisting them clockwise (fig. H).

 Separate the filters (10 & 11)

 Brush any loose dust from the filters

(10 & 11).

 Wash the filters in warm, soapy

water (fig. I).

Warning! Do not immerse the appliance

in water.

 Make sure that the dust collector (1)

and the filters (10 & 11) are dry.

 Refit the filters (10 & 11) on to the

appliance, twisting them counter-

clockwise until they lock into place.

 Refit the dust collector (1) onto the

appliance. Make sure that the dust

collector clicks into place.

Warning! Never use the appliance

without the filters. Optimum dust

collection will only be achieved with clean

filters.

Replacing the filters

The filters should be replaced every 6 to

9 months and whenever worn or

damaged. A replacement filter is

available from your Black & Decker

dealer (cat. no. VF70):

 Remove the old filters as described

above.

 Fit the new filters as described

above.

Storing the accessories (fig. J)

 Press the accessories into the

corresponding holders until they click

into place.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Black Decker dv 9605 tn Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info