Bedienungsanleitung Black Decker DV 9605 (Seite 8 von 100) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

69202

Zoom out

Zoom in

Vorherige Seite

1/100

Nächste Seite

ENGLISH

Features

1. Dust collector extension

2. Dust collector

3. Release button

4. On/Off switch (two-speed

switch DV1205)

5. Charging indicator

6. Filter cleaning button (DV1205 &

DV9605)

7. Charging base

Fig. A

8. Crevice tool

9. Brush tool

Identifying your product

The model design can be determined

from the suffix codes used in the

catalogue number. The following

catalogue numbers are described in this

manual:

 DV60XXY/DV72XXY/DV96XXY/

DV12XXY.

The suffix code XX corresponds to the

following designs:

 05: All units, supplied with a small

crevice tool and a brush tool.

The suffix code Y is used to identify the

range of colour/finish options.

The suffix code Y represented by the

letter N is used for models fitted with a

NiMH battery.

The suffix code Y represented by the

letter H is used for models fitted with a

HEPA filter.

Installation

Fitting the charging base to the wall

The charging base can be placed on a

work top or fitted to the wall to provide a

convenient storage and charging point for

the appliance.

When fixing to a wall, make sure that the

fixing method is suitable for the wall type

and is appropriate to the weight of the

appliance.

Assembly

Fitting the accessories (fig. A & B)

These models are supplied with some or

all of the following accessories:

 A crevice tool (8) for confined

spaces.

 A brush tool (9) for furniture and

stairs.

To fit an accessory, proceed as follows:

 Take the accessories from its

storage position on the appliance or

charging base (7) (fig. L & M).

 Insert the appropriate accessory into

the front of the appliance.

Residual risks

Additional residual risks may arise when

using the tool which may not be included

in the enclosed safety warnings. These

risks can arise from misuse, prolonged

use etc.

Even with the application of the relevant

safety regulations and the

implementation of safety devices, certain

residual risks cannot be avoided. These

include:

 Injuries caused by touching any

rotating/moving parts.

 Injuries caused when changing any

parts, blades or accessories.

 Injuries caused by prolonged use of

a tool. When using any tool for

prolonged periods make sure you

take regular breaks.

 Impairment of hearing.

 Health hazards caused by breathing

dust developed when using your tool

(example:- working with wood,

especially oak, beech and MDF).

Use

 Before first use, the battery must be

charged for at least 16 hours.

 Place the appliance on the charging

base whenever it is not in use.

Charging the battery (fig. C)

Before charging the battery:

 Make sure that the dust collector

extension (1) is pushed back into the

dust collector (2).

 Make sure that the appliance is

switched off. The battery will not be

charged with the on/off switch (4) in

the on position.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Black Decker DV 9605 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info