Bedienungsanleitung Black Decker DV1015EL T1 (Seite 7 von 76) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Schwedisch, Norwegisch, Finnisch)

582834

Zoom out

Zoom in

Vorherige Seite

1/76

Nächste Seite

ENGLISH

(Original instructions)

Removing the dust bowl and lters (g. H & I)

Warning! The lters are re-usable and should be cleaned

regularly.

u Press the release latch (2) and pull the dust bowl (4)

straight off.

u While holding the dust bowl over a bin or sink, pull out the

lter (14) to empty the contents of the bowl.

u To replace the dust bowl, place it back onto the handle

until it “clicks” rmly into position.

Warning! Never use the appliance without the lters. Opti-

mum dust collection will only be achieved with clean lters.

Pre-lter (g. J)

The Filter and pre-lter can be separated to allow better

cleaning.

u Twist the pre-lter (16) in a clockwise direction and lift

from the lter (15).

Cleaning the dust bowls and lters

u The dust bowls and lters can be washed in warm soapy

water.

u Make sure that the lters and the dust bowl are dry before

re-tting.

Replacing the lters

The lters should be replaced every 6 to 9 months and when-

ever worn or damaged.

Replacement lters are available from your Black & Decker

dealer:

For models: DV7215EL, DV1015EL, DV1415EL and

DV1815EL use lter part number VF110-XJ

Maintenance

Your Black & Decker corded/cordless appliance/tool has been

designed to operate over a long period of time with a minimum

of maintenance. Continuous satisfactory operation depends

upon proper tool care and regular cleaning.

Warning! Before performing any maintenance on corded/

cordless power tools:

u Switch off and unplug the appliance/tool.

u Or switch off and remove the battery from the appliance/

tool if the appliance/tool has a separate battery pack.

u Or run the battery down completely if it is integral and then

switch off.

u Unplug the charger before cleaning it. Your charger does

not require any maintenance apart from regular cleaning.

u Regularly clean the ventilation slots in your appliance/tool/

charger using a soft brush or dry cloth.

u Regularly clean the motor housing using a damp cloth. Do

not use any abrasive or solvent-based cleaner.

Protecting the environment

Separate collection. This product must not be

disposed of with normal household waste.

Should you nd one day that your Black & Decker product

needs replacement, or if it is of no further use to you, do not

dispose of it with household waste. Make this product avail-

able for separate collection.

Separate collection of used products and packaging

allows materials to be recycled and used again.

Re-use of recycled materials helps prevent environ-

mental pollution and reduces the demand for raw

materials.

Local regulations may provide for separate collection of elec-

trical products from the household, at municipal waste sites or

by the retailer when you purchase a new product.

Black & Decker provides a facility for the collection and

recycling of Black & Decker products once they have reached

the end of their working life. To take advantage of this service

please return your product to any authorised repair agent who

will collect them on our behalf.

You can check the location of your nearest authorised repair

agent by contacting your local Black & Decker ofce at

the address indicated in this manual. Alternatively, a list of

authorised Black & Decker repair agents and full details of our

after-sales service and contacts are available on the Internet

at: www.2helpU.com

Battery

If you want to dispose of the product yourself, the

battery must be removed as described below and

disposed of in accordance with local regulations.

u Preferably discharge the battery by operating the appli-

ance until the motor stops.

u Press the release button (2) and remove the dust bowl (4).

u Remove the seven screws holding the body of the appli-

ance together.

u Lift the housing cover away from the assembly.

u Detach all lead connections from the battery pack.

u Remove battery pack.

u Place the battery in a suitable packaging to ensure that

the terminals cannot be short-circuited.

u Take the battery to your service agent or to a local recy-

cling station.

Once removed, the battery cannot be retted.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Black Decker DV1015EL T1 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info