Bedienungsanleitung Black Decker FSH10SM (Seite 5 von 36) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Schwedisch, Norwegisch, Finnisch)

709570

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

ENGLISH

(Original instructions)

Attaching the hose and accessories (Fig. A & B)

Warning! Inspect the seal (2a) on the steam nozzle (2) and

hose (3) before each use. If the seal is missing or damaged

then please contact your nearest authorised repair agent. Do

not use the appliance.

Attaching the hose (Fig. A)

u Press in the clips (3a) on either side of the hose (3).

u Press the hose (3) onto the steam nozzle (2) and release

the clips (3a).

Important! Ensure that the hose (3) is securely fastened

before using SteaMitt

. If steam escapes from the joint then

the SteaMitt

is not correctly tted, allow the unit to cool then

remove and re-t the hose.

Removing the hose and accessories (Fig. A & B)

Warning! The Steam nozzle, hose and SteaMitt

become hot

during use.

Allow the unit and all attachments to cool before removing.

Removing the hose (Fig. A)

u Press in the clips (3a) on either side of the hose (3) and

pull away from the steam nozzle (2)

Filling the water tank (Fig. C)

Note! Fill the water tank with clean tap water. Donot use

chemicals or any other additives.

Note! In areas of very hard water, the use of de-ionised water

is recommended.

u Switch off the unit and disconnect from the mains supply.

u Open the ller cap (7) by ipping it up.

u Fill the water tank (6) with water.

Warning! Your water tank has a 0.10 litre capacity. Do not

over ll the tank.

u Replace the lter cap.

Note: Ensure the lter cap is rmly secured.

Note: Do not use chemical cleaners with your SteaMitt

Fitting the cleaning pad (Fig. B)

u Fit the cleaning pad (9) to the SteaMitt

(4) by attaching

the 'loop' velcro strips (9a) on the upper side of the

cleaning pad, to the 'hook' velcro pads (4a) on the

underside of the SteaMitt

(4). Press down rmly.

Warning! The SteaMitt

should not be used without tting a

cleaning pad.

Note: The SteaMitt

accommodates 3 types of cleaning pads

of varying thickness. The thinnest can be used for cleaning 3D

forms such as taps etc. The thicker versions can be used for

larger at areas.

Use

Switching on and off

u To switch the appliance on, press the ON/Off button (5). It

takes approximately 15 seconds for the SteaMitt

to heat

up.

Note: always have your hand inside the SteaMitt

before you

press the steam button.

u To produce steam, press the steam button (1) on top of

the unit.

u To switch the appliance off, turn off the steam switch (1)

then press the ON/OFF button (5).

Caution! Always empty the SteaMitt

water tank after use.

Note! When rst lled or after running dry, it can take up to 45

seconds for steam to be produced.

Hints for optimum use

General

u For optimal cleaning results never use the SteaMitt

without rst attaching a cleaning pad.

u Do not use chemical cleaners or any other additives with

your SteaMitt

u Delicate surfaces, mirrors for example, should be cleaned

first while the pad is at its driest, thereby avoiding streaks.

u Do not use the SteaMitt

on cold glass, such as windows

as damage may be caused by the sudden change in

temperature.

Caution! It is important to monitor the water level in the water

tank (6). To rell the water tank and continue to sanitize/clean

turn the SteaMitt

'OFF'. Unplug the unit from the electrical

wall outlet, rell the water tank (6).

Warning! Always use the SteaMitt

as shown in figure

E, with your hand inside the protective glove.

Warning! Never attempt to use the SteaMitt

gripping it externally as shown in figure F. This will result

in scalding.

Warning! Avoid using the SteaMitt

in tight corners as

shown in gure H.

Warning! Should a problem occur during use, use the

quick release tab (8) to quickly remove the SteaMitt

from your hand as shown in gure I.

After use (Fig. E)

u Turn the SteaMitt

'OFF'. Turn the steam operation button

(1) to off and then press the ON/OFF button (5).

u Wait until the SteaMitt

cools down.

u Unplug the SteaMitt

from the electrical wall outlet.

u Empty the water tank.

u remove the cleaning pad (9) and wash it ready for next

use.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Black Decker FSH10SM Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info