Bedienungsanleitung Black Decker FSM1610 T1 (Seite 6 von 56) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Schwedisch, Norwegisch, Finnisch)

586609

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

ENGLISH

(Original instructions)

Caution! It is important to monitor the water level in the water

tank. To rell the water tank and continue to sanitise/clean,

return the handle (4) to the upright position and turn the steam

mop ‘OFF’. Unplug the unit from the electrical wall outlet,

remove and rell the water tank (3).

Caution! Never leave the steam mop in one spot on any

surface for any period of time. Always place the steam mop on

the resting mat (7) with the handle (4) in the upright position

when stationary and make sure the steam mop is turned off

when not in use.

Carpet refreshing (FSM1620 only)

u Place a cleaning pad (6) on the oor with the ‘hook & loop’

side facing up.

u Raise the steam mop off the resting mat (7) and lightly

press it down onto the cleaning pad (6).

u Place the carpet glider (11) on the oor.

u Lightly press the steam mop down onto the carpet glider

(11) until it clicks into place.

u Place the steam mop on the resting mat. (7)

u Connect the steam mop to the mains.

u Press the ON/OFF button (1). It takes approximately 15

seconds for the steam mop to heat up.

u Turn the Autoselect

dial (2) to the Wood/Laminate set-

ting.

u Pulling the handle (4) back will activate the steam pump.

After a few seconds steam will start to come out of the

steam head.

Note: When rst lled or after running dry it can take up to 45

seconds for steam to be produced.

u Push and pull the steam mop slowly across the carpet to

thoroughly refresh each section.

Note: During use you may turn off the steam pump by return-

ing the handle (4) to the upright position, this convenient

feature will allow you to place the steam mop on the resting

mat (7) so that you may move items of furniture with out the

need to switch the appliance off.

u When you have nished using the steam mop, return the

handle (4) to the upright position and turn it ‘OFF’, place it

on the resting mat (7) and wait until the steam mop cools

down. (approximately ve minutes)

Caution! It is important to monitor the water level in the water

tank. To rell the water tank and continue to sanitise/clean,

return the handle (4) to the upright position and turn the steam

mop ‘OFF’. Unplug the unit from the electrical wall outlet,

remove and rell the water tank (3).

Caution! Never leave the steam mop in one spot on any

surface for any period of time. Always place the steam mop on

the resting mat (7) with the handle (4) in the upright position

when stationary and make sure the steam mop is turned off

when not in use.

After use (Fig. H & I)

u Return the handle (4) to the upright position and turn the

steam mop ‘OFF’,

u Place the steam mop on the resting mat (7) and wait until

the steam mop cools down. (approximately ve minutes)

u Unplug the steam mop from the electrical wall outlet.

u Empty the water tank (3).

u Remove the cleaning pad (6) and wash it ready for next

use. (Take care to follow the wash care instructions

printed on the cleaning pad).

u Wrap the supply cable around the cable tidy hooks (8 &

9).

Note: The top cable tidy hook (9) rotates to easily release the

cable ready for next use.

u Clip the supply cable onto itself using the cable tidy clip

(17) close to the plug.

u Place steam mop on the resting mat (7) for storage.

Note: With the handle (4) in the upright position, the cable

neatly wrapped around the cable tidy hooks (8 & 9) and

secured with the cable tidy clip (17) your steam mop will stand

on its own for storage. Alternatively there is a hanging bracket

(18) built into the hand grip (19) which will allow your steam

mop to be hung from a suitable hook on the wall. Always

ensure that your wall hook is capable of supporting the weight

of the steam mop safely.

Technical data

FSM1610

(Type 1)

FSM1620

(Type 1)

Voltage V

230 230

Power W

1600 1600

Tank capacity ml

460 460

Weight kg 2.7 3.06

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Black Decker FSM1610 T1 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Black Decker FSM1610 T1

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info