Bedienungsanleitung Black Decker FV1805NB TH2 (Seite 7 von 64) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Spanisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

586397

Zoom out

Zoom in

Vorherige Seite

1/64

Nächste Seite

ENGLISH

Safety of others

 This appliance is not intended for use by persons

(including children) with reduced physical, sensory or

mental capabilities, or lack of experience and

knowledge, unless they have been given supervision or

instruction concerning the use of the appliance by a

person responsible for their safety.

 Children should be supervised to ensure that they do

not play with the appliance.

Electrical safety

Your charger has been designed for a specific voltage.

Always check that the mains voltage corresponds to the

voltage on the rating plate. Never attempt to replace the

charger unit with a regular mains plug.

Features

1. Pivot lock trigger

2. Dust container door

3. Release latch (for dust container door)

4. Charging base

5. Charging indicator

6. Pivoting arm

7. Beater bar/vac head

8. Maintenance access panel

9. Beater bar/vac On/Off switch

Installation

Attaching the handle to the appliance (fig. A)

 Align the D-handle with the main body of the unit and

push it down until it is fully seated.

 Remove the phillips head screw from the plastic bag.

 Insert the screw (13) into the hole.

 Tighten the screw (13) using a phillips screwdriver.

Charging base (fig. B)

Place the charging base (4) on the floor, convenient to an

electrical outlet. The Pivot Plus

slim vac is stored and

charged in the base whenever it is not in use.

Warning! Falling/tripping hazard. Do not place the charging

base on any elevated surface. The appliance is designed to

be placed into and removed from the charging base when

it is sitting on the floor convenient to an electrical outlet.

Residual risks

Additional residual risks may arise when using the tool which

may not be included in the enclosed safety warnings. These

risks can arise from misuse, prolonged use etc.

Even with the application of the relevant safety regulations

and the implementation of safety devices, certain residual

risks cannot be avoided. These include:

 Injuries caused by touching any rotating/moving parts.

 Injuries caused when changing any parts, blades or

accessories.

 Injuries caused by prolonged use of a tool. When using

any tool for prolonged periods make sure you take

regular breaks.

 Impairment of hearing.

 Health hazards caused by breathing dust developed

when using your tool (example:- working with wood,

especially oak, beech and MDF).

Use

Before first use, the battery must be charged for at least

24 hours.

 Place the appliance on the charging base (4) whenever

it is not in use.

You may need to charge the appliance many times initially in

order to achieve the best running time performance.

Charging the battery (fig. B)

Warning! Do not charge the battery at ambient

temperatures below 10°C or above 40°C.

 Make sure that the appliance is switched off.

The battery will not be charged with the beater bar/vac On/

Off switch (9) in the on position.

 Place the appliance on the charging base (4) as shown.

 Plug in the charger. Switch on at the mains.

The charging indicator (5) will be lit.

 For the first charging, leave the appliance to charge for

at least 24 hours.

While charging, the charger may become warm. This is

normal and does not indicate a problem.

The appliance can be left connected to the charger

indefinitely. The charging indicator (5) will be lit as long as

the appliance is connected to the plugged-in charger.

Opening the appliance (fig B, C and D)

 To open the appliance for use, lift it from the charging

base (4) (fig. B).

Your charging base is double insulated;

therefore no earth wire is required.

Short circuit proof safety isolating transformer.

The mains supply is electrically separated from

the transformer output.

Charge only at ambient temperatures between

10°C and 40°C.

The charging base is intended for indoor use

only.

ta = 40°C

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Black Decker FV1805NB TH2 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Black Decker FV1805NB TH2

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info