Bedienungsanleitung Black Decker GD300X (Seite 8 von 12) (Englisch)

501661

Zoom out

Zoom in

Vorherige Seite

1/12

Nächste Seite

Switching off

 To switch the appliance off, release the switch lever (5).

Never attempt to lock a switch in the on position.

Warning! Let the appliance work at its own pace. Do not

overload.

To look after a lawn properly, you need to do more than just

mow it once a week throughout the Summer. The lawn will

benefit from a vigorous raking of the grass to remove the

dead matter, moss and weed which disfigures a lawn. The

build up of dead grass provides a mat of absorbent fibres

which prevents water getting through to the ground and if

this mat is kept waterlogged, it can encourage grass

diseases and prevent healthy grasses taking root.

 Place the bulk of the extension cable on the lawn close

to the starting point (Fig. G, position 1).

 Hold the handle with both hands and hold the upper

portion of the extension cable in the hand not operating

the switch lever.

Warning! Do not attempt to operate your raker with one

hand - you must guide it with both hands.

 Switch on as described above.

 Proceed down the raking area from position 1 towards

position 2 and, on reaching position 2, turn to the right

and proceed towards position 3. Continue to the end of

the raking area, turn to the left, and proceed towards

position 4.

 Continue in the same manner as shown in the left hand

diagram, always working away from the cable. Do not

adopt the method shown in the right hand diagram,

working towards the cable, as this is dangerous

practice.

When you have finished using your raker we recommend

that you clean all debris from it before putting it away. Refer

to the “Maintenance” section in this manual.

Note: To obtain the best results rake your lawn or grassed

area regularly and do not rake when the grass is wet.

 When raking over the edge of your lawn, press

downwards on the handle to stop the wheels dropping

over the edge.

 To prolong the effective raking life of your tine

assembly, clear the lawn area of any loose debris or

stones.

Warning! Do not connect a damaged cord to the supply or

touch a damaged cord before it is disconnected from the

supply. A damaged cord can lead to contact with live parts.

Warning! Do not touch the tines before the machine is

disconnected form the supply and the tines have come to a

complete stop.

Warning! Children should be supervised to ensure that they

do not play with the appliance.

Warning! This appliance is not intended for use by persons

(including children) with reduced physical, sensory or mental

capabilities, or lack of experience and knowledge, unless

they have been given supervision or instruction concerning

the use of the appliance by a person responsible for their

safety.

Hints for optimum use

Do not force your raker through grass that is too long. It is

recommended that your raker should not be used in grass

that is longer that 75mm (3 inches) in length.

 Do not use in wet or damp conditions.

 To obtain the best result from your raker use it regularly.

It is recommended that your raker is used at the

beginning and end of each grass cutting season to give

your lawn a thorough scarifying. Your raker should also

be used after each mowing session to remove any

grass cuttings that may have been left behind by your

raker.

 Rake first in one direction and then at the next occasion

at right angles. Initially, this may make the grass look

bare and straggly but it will rapidly recover.

Maintenance

Your Black & Decker appliance has been designed to

operate over a long period of time with a minimum of

maintenance. Continuous satisfactory operation depends

upon proper appliance care and regular cleaning.

 Keep the appliance clean and dry.

 Regularly clean the ventilation slots with a clean, dry

paint brush.

 Regularly use a blunt scraper to remove grass and dirt

from the appliance.

 To clean the appliance, use only mild soap and a damp

cloth. Never let any liquid get inside the tool and never

immerse any part of the tool into liquid. Do not use any

abrasive or solvent-based cleaner.

Troubleshooting

If your appliance seems not to operate properly, follow the

instructions below. If this does not solve the problem, please

contact your local Black & Decker repair agent.

Warning! Before proceeding, remove the plug from the

socket.

Motor buzzes but the tine assembly does not move

 Carefully remove any obstructions from the tines.

No noise and tine assembly does not move

 Check that the power cables are properly connected.

 Check the mains fuses.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Black Decker GD300X Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Black Decker GD300X

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info