Bedienungsanleitung Black Decker GF834 T2 (Seite 9 von 88) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Schwedisch, Norwegisch, Finnisch)

585920

Zoom out

Zoom in

Vorherige Seite

1/88

Nächste Seite

ENGLISH

Assembling the handle

• Place the mower with its wheels on a

firm and level surface.

• Insert the handle bars into the openings

as shown in fig. B1, so that the curve

makes them widen at the top.

• Secure each of the bars with a bolt and

shaped washer as shown. Securely

tighten the bolt using the spanner

supplied.

• Slide the cable restraint onto the

U-shaped handle below the black

switchbox.

• Place the U-shaped upper handle bar

onto the bars as shown.

• Secure the upper handle bar using the

bolts, washers and wing nuts as

shown.

• Secure the cables to the handle using

the cable clips supplied.

Do not use any tools to tighten the wing nuts.

Grassbox assembly (Fig. C)

The grassbox comes supplied in two

halves. In order to assemble proceed as

follows:

• Align the two halves of the grassbox as

shown.

• Fit the two halves together with the 5

screws, using the screwdriver supplied.

Fitting the grassbox to your mower:

• The spring loaded rear flap is lifted and

the top of the grassbox is placed over

the mounting.

• The rear flap can now be released to lock

the grassbox into position.

Removing the grassbox from your mower:

The full grassbox may be removed by raising

the grassflap, freeing the grassbox from its

mounting and resting it on the lawn. The

grassflap can be gently lowered, leaving both

hands free to lift the full grassbox.

How to use your mower (Fig. D)

Observe all of the relevant warnings when

using your mower.

We recommend the directional method of

operation to obtain the maximum cutting

performance from your mower and to

reduce the risk of the trailing extension lead

from entering the cutting path.

• Place the bulk of the supply cable on

the lawn close to the starting point.

To fix the cable to the restraint, proceed as

follows:

• Bring the socket end of the extension

cable from behind and connect it to

your mower plug.

• Form a loop on your extension cable

close to the cable restraint.

• Push the loop through the slot from the

opposite side of the restraint hook,

position the loop over the hook and pull

the cable back through the slot. Your

cable will now be restrained.

• The extension cable should now fall

away from your mower and behind the

operator, ready for use.

Warning! Do not attempt to operate your

mower with one hand - you must guide it

with both hands.

• Tilt the handle downwards to slightly raise

the front of your mower and to reduce

the risk of lawn damage whilst starting,

depress the safety lock-off button on the

switchbox and whilst still depressed pull

the switch lever towards you. Your

mower will start and you can now allow

the lock-off button to be released and

lower your mower to its proper cutting

position, and commence cutting using

both hands to guide it.

• Proceed down the cutting area as shown

in Fig. D1 (a), working from position 1

towards position 2 and, on reaching

position 2, turn to the right and proceed

towards position 3. Continue to the end

of the cutting area, turn to the left and

proceed towards position 4. Continue in

the same manner as shown in Fig. D1

(a), always working away from the cable.

Do not adopt the method as shown in

Fig. D1 (b), working towards the cable,

as this is dangerous practice.

• Ensure the cable is clear of the mower

when manoeuvering around obstructions

or when edging.

Note: Your mower has 360º rotating wheels

for maximum manoeuverability. The rear

wheels can be locked into position for

straight, accurate, cutting as follows:

•

Push the mower forwards until all the wheels

rotate towards the rear of the mower.

• Pull the locking lever on the left-hand side

of the mower until the ratchet engages.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Black Decker GF834 T2 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info