Bedienungsanleitung Black Decker GFC1234 (Seite 8 von 104) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Spanisch, Schwedisch, Norwegisch, Finnisch)

474475

Zoom out

Zoom in

Vorherige Seite

1/104

Nächste Seite

Grassbox assembly (Fig. C)

The grassbox comes supplied in two halves.

In order to assemble proceed as follows:

• Align the two halves of the grassbox as

shown.

• Fit the two halves together with the 5

screws, using the screwdriver supplied.

Fitting the grassbox to your mower:

• The spring loaded rear flap is lifted and

the top of the grassbox is placed over

the mounting.

• The rear flap can now be released to lock

the grassbox into position.

Removing the grassbox from your mower:

The full grassbox may be removed by raising

the grassflap, freeing the grassbox from its

mounting and resting it on the lawn. The

grassflap can be gently lowered, leaving both

hands free to lift the full grassbox.

Battery Cover Fitting

• Assemble battery cover provided

inserting hinge no.1 into mower body

then push home hinge no. 2.

Fitting the Battery strap

• Locate the battery and its carrying strap.

• Fit the battery carrying strap as shown.

• The strap should be kept on the battery

at all times.

Battery information

• The battery in your cordless lawnmower

is a sealed lead acid system. The battery

employs an absorbed electrolyte and,

can therefore, be stored in any position

without fear of leakage.

The battery has been charged at the

factory, but you will need to recharge it

for a minimum of 30 hours before every

use to make sure it is fully charged.

• For optimal performance the battery

should be recharged after each use.

• For winter storage ensure:

• The mower is fully charged before

storing.

• The temperature of the storage

location is below 25˚C.

• Storage duration is less than

6 months.

• Always store your mower in a dry and

cool location.

• Keep the mower and battery away from

water, heat sources (such as radiators,

heaters, stoves etc.), flames or chemicals.

• Powerful and efficient permanent

magnet motor which gives effective

cutting and bagging in all reasonable

conditions and a low noise level.

Carton contents

The carton contains:

1 Lawnmower body

1 Handle assembly (3 parts)

1 Grassbox assembly (2 parts)

1 Spanner/scraper

1 Screwdriver

1 Battery

1 Battery cover

1 Charger

1 Safety key

1 Spare fuse

2 Wing nuts

2 Washers

2 Shaped washers

2 Bolts for upper handle

2 Bolts for lower handle

5 Screws for grassbox

1 Wiper (UK only)

2 Screws for wiper (UK only)

2 Cable clips

1 Instruction manual

• Carefully unpack all parts.

Assembling the handle

• Place the mower with its wheels on a

firm and level surface.

• Insert the handle bars into the openings

as shown in fig. B1, so that the curve

makes them widen at the top.

• Secure each of the bars with a bolt and

shaped washer as shown. Securely

tighten the bolt using the spanner

supplied.

• Place the U-shaped upper handle bar

onto the bars as shown.

• Secure the upper handle bar using the

bolts, washers and wing nuts as shown.

• Secure the cables to the handle using

the cable clips supplied.

Do not use any tools to tighten the wing nuts.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Black Decker GFC1234 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Black Decker GFC1234

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info