Bedienungsanleitung Black Decker GFC1238 T2 (Seite 10 von 104) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Spanisch, Schwedisch, Norwegisch, Finnisch)

586110

Zoom out

Zoom in

Vorherige Seite

1/104

Nächste Seite

Warning! Always remove the safety key

from mower when leaving it unattended,

even for a short period of time.

• Your safety key will be found in the

parts pack (plus one spare fuse).

Starting

• Insert the safety key into position and

push fully home.

• Tilt the handle downwards to slightly raise

the front of your mower and to reduce

the risk of lawn damage whilst starting,

depress the safety lock-off button on the

switchbox and whilst still depressed pull

the switch lever towards you. Your

mower will start and you can now allow

the lock-off button to be released and

lower your mower to its proper cutting

position, and commence cutting using

both hands to guide it.

• To turn the mower off, just release the

lever. The spring-loaded “snap-action”

lever will relocate itself back into its original

position inside the switch housing.

Note: Your mower has 360º rotating wheels

for maximum manoeuverability. The rear

wheels can be locked into position for

straight, accurate, cutting as follows:

• Push the mower forwards until all the

wheels rotate towards the rear of the

mower.

• Pull the locking lever on the left-hand side

of the mower until the ratchet engages.

• To unlock the wheels push the release

button forwards.

• Should the lever fully engage on the

ratchet, but the rear wheels not lock into

place, then release the lever, unscrew the

cable adjustment by one turn and re-

engage the lever and ratchet. Repeat

until the wheels fully lock into position.

Your mower will continue to operate whilst

you are pulling the switch lever. To stop your

mower release the switch lever.

When you have finished using your mower

we recommend that you clean all debris from

it before putting it away. Refer to the

‘Care and maintenance’ section.

Note: To obtain the best results cut your

lawn or grassed area regularly and do not

cut when the grass is wet.

If, when mowing, loose grass is seen to be

scattered from beneath the mower, the grass-

bag is probably full and should be emptied.

Manoeuverability (Fig. D)

Your mower has fully rotating wheels and

as such is capable of manoeuvering around

trees posts and other objects. It also allows

accurate mowing of contoured features in

your garden like flower beds.

For maximum manoeuverability release the

rear wheel locking mechanism by pushing

the release button forwards.

Height of cut adjustment (Fig. F)

Warning! Remove the safety key before making

any adjustment and give the blade time to stop

rotating: the cutting blades are sharp.

• Flip the lever outwards and hold it firmly.

• Using the lever, rotate the knob to set

the desired height of cut.

• Flip the lever back to lock the knob.

• To produce a stripe on your lawn, first slide

the striping flap in position and fix with the

2 screws provided, then adjust the height

of cut to a low position (UK only).

Note: For longer or uneven growth lawns

(particularly the first cut of the season) first

use a higher height setting and then finish

with a second cut to the desired length.

Maintenance of blades

The steel blade is designed to give a fine

finish in long or tough grass.

If, however, because of damage or wear

the cutting performance deteriorates, then

the mower may require a new blade, or at

least the existing blade to be sharpened.

We recommend that the steel blade is

sharpened or a new blade fitted at the

beginning of the season.

Replacement blades are available from

Black & Decker dealers and service centres.

Warning! When fitting a new blade use

only the Black & Decker replacement part

specified for your machine - do not attempt

to fit any other blade.

Fitting new blade (Fig. G)

Observe all the relevant warnings before

changing the blade.

Warning! Remove safety key before

changing the blade.

• Turn your mower over on its side so

that the underside of the cutter cover is

exposed.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Black Decker GFC1238 T2 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info