Bedienungsanleitung Black Decker GK1000 (Seite 8 von 104) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Schwedisch, Norwegisch, Finnisch)

55638

Zoom out

Zoom in

Vorherige Seite

1/104

Nächste Seite

ENGLISH

d. Store idle power tools out of the reach of children

and do not allow persons unfamiliar with the power

tool or these instructions to operate the power tool.

Power tools are dangerous in the hands of untrained

users.

e. Maintain power tools. Check for misalignment or

binding of moving parts, breakage of parts and any

other condition that may affect the power tools

operation. If damaged, have the power tool repaired

before use. Many accidents are caused by poorly

maintained power tools.

f. Keep cutting tools sharp and clean. Properly

maintained cutting tools with sharp cutting edges

are less likely to bind and are easier to control.

g. Use the power tool, accessories and tool bits etc.

in accordance with these instructions, taking into

account the working conditions and the work

to be performed. Use of the power tool for operations

different from those intended could result in

a hazardous situation.

5. Service

a. Have your power tool serviced by a qualified repair

person using only identical replacement parts. This

will make sure that the safety of the power tool is

maintained.

Additional safety instructions for the Alligator

Lopper

Warning! Never use the tool above shoulder height. Always

position yourself out of the path of falling branches and

debris.

Warning! Do not use this tool to fell trees.

X Keep all parts of your body and clothing away from the

saw chain at all times. Hold the tool in front of you and

be aware of the saw chain position especially when

cutting branches near the ground. Before you switch on

make sure the saw chain is not contacting anything.

X Pre-plan a safe exit from falling branches and debris.

Ensure the exit route is clear of obstacles that would

prevent or hinder movement. Remember wet grass and

freshly cut bark is slippery.

X Be aware of the direction that a branch may fall.

Consider all conditions that may affect the direction

of fall, including:

- The intended direction of fall.

- The natural lean of the branch.

- Any unusual heavy limb structure or decay.

- Surrounding trees and obstacles including overhead

lines.

- The wind speed and direction.

X The safe distance between a branch and debris to

be felled and bystanders, buildings and other objects

is at least 2 1/2 times the length of the branch. Any

bystander, building or object within this distance is

at risk from being struck by the falling branch.

X When cutting a limb that is under tension, be aware of

spring-back. When the tension in the wood fibres are

released the spring loaded limb may strike the operator

and/or throw the tool out of control.

X Always wear suitable safety equipment such as non-

skid safety shoes, hard hat, goggles, ear protection

and gloves when operating the tool.

X Ensure someone is nearby (at a safe distance) in case

of an accident.

X Do not attempt to operate the tool when in a tree, on

a ladder or standing on any other unstable support.

X Keep proper footing and balance at all times.

X Hold the tool firmly with both hands when the motor

is running.

X Keep handles dry, clean and free from oil and grease.

Greasy oily handles are slippery causing loss of control.

X Do not let the moving chain contact any object at the tip

of the chain guide bar.

X Keep your saw chain properly tensioned. Check tension

at regular intervals with the motor stopped and cord

disconnected.

X Begin and continue cutting only with the chain moving

at full speed.

X Watch for shifting branches or other forces that could

close a cut and pinch or fall into the chain.

X Use extreme caution when re-entering a previous cut.

Engage spikes on lower jaw into wood and allow the

chain to reach full speed before proceeding with cut.

X Use of this tool for operation different to those intended

could result in hazardous situations. Cut wood only.

Don't use this tool for purposes not intended - for

example - Don't use tool for cutting plastic, masonry

or non wood building materials.

X If any debris gets caught with the guard or tool

discontinue use, disconnect the power cord and

clear debris.

X Worn chains and chain guide bars should be replaced.

X Only use replacement bars and chains specified by the

manufacturer.

Safety of others

X This tool is not intended for use by persons (including

children) with reduced physical, sensory or mental

capabilities, or lack of experience and knowledge,

unless they have been given supervision or instruction

concerning the use of the appliance by a person

responsible for their safety.

X Children should be supervised to ensure that they

do not play with the appliance.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Black Decker GK1000 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Black Decker GK1000

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info