Bedienungsanleitung Black Decker GK1000 (Seite 11 von 104) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Schwedisch, Norwegisch, Finnisch)

55638

Zoom out

Zoom in

Vorherige Seite

1/104

Nächste Seite

ENGLISH

Switching on and off

Warning! Never attempt to lock or fix a switch actuator in the

on position.

For your safety, this tool is equipped with a double switching

system. This system prevents starting the tool inadvertently.

Switching on (fig. F)

X Ensure a firm grip on the handles and then squeeze

both switch actuators (5) to switch the unit on.

Switching off (fig.F)

Release either of the switch actuators (5).

Note: Both switch actuators must be activated for the

product to be used.

Do not force the tool, allow it to do the work. It will do a better

and safer job at the speed for which it is designed. Excessive

force will stretch the chain.

If the saw chain or chain guide bar (3) becomes jammed:

X Switch the tool off.

X Disconnect the tool from the mains supply.

X Open the cut with wedges to relieve the strain on the

chain guide bar (3). Do not try to wrench the saw free.

Start a fresh cut.

Trimming branches (fig. G)

Ensure that there are no local by-laws or regulations that

would prohibit or control the trimming of the tree limbs.

Make sure the tool is running at full speed before making

acut.

X Hold the tool firmly in place to avoid possible bouncing

or sideways movement of the tool.

X Guide the tool using light pressure.

Always cut down from the top. This way you will avoid

pinching the saw chain.

X Remove branches as shown in fig G, starting from the

branch tip, reduce the branch in logical steps cutting off

small sections.

X Remove the tool from the cut while it is running at full

speed.

Maintenance

Your Black & Decker corded/cordless appliance/tool has

been designed to operate over a long period of time with a

minimum of maintenance. Continuous satisfactory operation

depends upon proper tool care and regular cleaning.

Warning! Before performing any maintenance on corded/

cordless power tools:

X Switch off and unplug the appliance/tool.

X Or switch off and remove the battery from the appliance/

tool if the appliance/tool has a separate battery pack.

X Or run the battery down completely if it is integral and

then switch off.

X Unplug the charger before cleaning it. Your charger

does not require any maintenance apart from regular

cleaning.

Regularly clean the ventilation slots in your appliance/tool/

charger using a soft brush or dry cloth.

Regularly clean the motor housing using a damp cloth.

Do not use any abrasive or solvent-based cleaner.

Regularly open the chuck and tap it to remove any dust from

the interior (when fitted).

Cleaning

X Regularly remove the chain access cover and remove

any debris that has become trapped.

X Regularly clean the ventilation slots with a clean, dry

paint brush.

X To clean the tool, use only mild soap and a damp cloth.

Never let any liquid get inside the tool and never

immerse any part of the tool into liquid.

Oiling

X Regularly oil the oiling points (10) as indicated in fig. B.

Transport

X Always transport the tool with the jaws closed.

Storage

X When the tool will not be used for several months, wipe

any metal components with oil.

X Store the tool in a secure and dry location. The storage

temperature must always remain in the range of + 5 °C

to + 40 °C. Place the product on a level safe location.

Protecting the environment

Should you find one day that your Black & Decker product

needs replacement, or if it is of no further use to you, do not

dispose of it with household waste. Make this product

available for separate collection.

Separate collection of used products and packaging

allows materials to be recycled and used again.

Re-use of recycled materials helps prevent

environmental pollution and reduces the demand

for raw materials.

Local regulations may provide for separate collection of

electrical products from the household, at municipal waste

sites or by the retailer when you purchase a new product.

Separate collection. This product must not be

disposed of with normal household waste.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Black Decker GK1000 Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Black Decker GK1000

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info