Bedienungsanleitung Black Decker GK1630 (Seite 10 von 108) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Spanisch, Schwedisch, Norwegisch, Finnisch)

55630

Zoom out

Zoom in

Vorherige Seite

1/108

Nächste Seite

ENGLISH

Do not use your chainsaw in wet

conditions or expose it to rain.

Always wear ear and eye protection.

Always remove the plug from the socket

before inspecting a damaged cable.

Be careful not to use your chainsaw if the

cable is damaged.

To ensure continued safe operation,

check the chain tension as described

in this manual after every 10 minutes

of use, and adjust back to a clearance

of 3 mm as required.

Double insulation

Your chainsaw is double insulated.

This means that all external metal parts are

electrically isolated from the power supply.

This is achieved by placing an extra insulation

barrier between the electrical and mechanical

parts. Double insulation means greater

electrical safety and obviates the necessity

of having the machine earthed.

Electrical safety

◆ Make sure your chainsaw is correct for your

supply. The voltage can be found on the rating

plate.

Technical data

Bar length 30 cm 35 cm 40 cm

Supply voltage (V) 230 230 230

Rated input (W) 1600 1600 1600

Max. cutting length (cm) 30 35 40

Chain speed (no load m/s) 8 8 8

Weight (kg) 3.7 3.8 3.9

Oil capacity (ml) 180 180 180

Safety class II II II

OVERVIEW (fig. A)

1. On/off switch

2. Lock-off button

3. Oil cap

4. Oil level indicator

5. Front guard/chain brake

6. Chain cover

7. Chain cover bolt

8. Guide bar

9. Chain

10. Chain sheath

11. Spanner

ASSEMBLY

Before assembly, make sure that the tool

is switched off and unplugged.

Oiling the chain (fig. A)

◆ You must do this whenever you use a new

chain for the first time. Take the new chain out

of its plastic bag and soak it in chain oil for at

least an hour before using it. Use Black & Decker

chain oil (cat. no. A6027).

◆ We recommend that you use only one brand

of oil during the lifetime of your chainsaw

because mixtures of different oils could lead to

the oil becoming degraded, which can

drastically shorten the lifetime of the saw chain.

◆ Never use waste oil, thick oil or very thin sewing

machine oil. These may damage your chainsaw.

Fitting the guide bar and chain (fig. B, C & D)

Wear protective gloves.

◆ Place the saw onto a stable surface.

◆ Loosen and remove the chain cover bolt (7)

(fig. C).

◆ Remove the chain cover (6).

◆ Place the chain (9) over the guide bar (8),

making sure that the cutters on the upper part

of the guide bar face towards the front (fig. B).

◆ Guide the chain around the guide bar and pull

it to create a loop at the rear end of the guide

bar.

◆ Place the chain and guide bar onto the saw.

Guide the chain around the drive sprocket (12).

Place the guide bar onto the studs (13). Make

sure that the sliding nut peg (16) locates into

the tensioning hole (17).

◆ Place the chain cover (6) onto the saw.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Black Decker GK1630 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info