Bedienungsanleitung Black Decker GK1630T T3 (Seite 10 von 104) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Spanisch, Schwedisch, Norwegisch, Finnisch)

584940

Zoom out

Zoom in

Vorherige Seite

1/104

Nächste Seite

ENGLISH

Do not use your chainsaw in wet

conditions or expose it to rain.

Always wear ear and eye protection.

Always remove the plug from the socket

before inspecting a damaged cable.

Be careful not to use your chainsaw if the

cable is damaged.

To ensure continued safe operation,

check the chain tension as described

in this manual after every 10 minutes

of use, and adjust back to 3 mm as

required.

Double insulation

Your chainsaw is double insulated.

This means that all external metal parts are

electrically isolated from the power supply.

This is achieved by placing an extra insulation

barrier between the electrical and mechanical

parts. Double insulation means greater

electrical safety and obviates the necessity

of having the machine earthed.

Electrical safety

◆ Make sure your chainsaw is correct for your

supply. The voltage can be found on the rating

plate.

Technical data

Bar length 30 cm 35 cm 40 cm

Supply voltage (V) 230 230 230

Rated input (W) 1600 1600 1600

Max. cutting length (cm) 30 35 40

Chain speed (no load m/s) 8 8 8

Weight (kg) 3.7 3.8 3.9

Oil capacity (ml) 180 180 180

Safety class II II II

OVERVIEW (fig. A)

1. On/off switch

2. Lock-off button

3. Oil cap

4. Oil level indicator

5. Front guard/chain brake

6. Chain cover

7. Control knob

8. Guide bar

9. Chain

10. Chain sheath

ASSEMBLY

Before assembly, make sure that the tool

is switched off and unplugged.

Oiling the chain (fig. A)

◆ You must do this whenever you use a new

chain for the first time. Take the new chain out

of its plastic bag and soak it in chain oil for at

least an hour before using it. Use Black & Decker

chain oil (cat. no. A6027).

◆ We recommend that you use only one brand

of oil during the lifetime of your chainsaw

because mixtures of different oils could lead to

the oil becoming degraded, which can

drastically shorten the lifetime of the saw chain.

◆ Never use waste oil, thick oil or very thin

sewing machine oil. These may damage your

chainsaw.

Fitting the guide bar and chain (fig. B & C)

Always wear protective gloves when

working on your chainsaw and ensure that

the plug is not in the electrical outlet.

◆ Fit the saw chain (9) over the guide bar (8),

making sure that the cutters are the right way

round and that the slider tensioner (11) is

facing towards you (fig. B).

◆ With the tool horizontal on a stable surface,

put the bar and chain onto the bar mounting

studs (13), ensuring the chain is around the

drive sprocket (12). Make sure that the cutters

on the upper part of the guide bar face

towards the front (fig. B).

◆ Before fitting the chain cover check that the

cam (18) is in the correct position.

If necessary, press and turn the control knob (7)

clockwise to rotate the cam into the correct

position.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Black Decker GK1630T T3 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Black Decker GK1630T T3

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info