Bedienungsanleitung Black Decker GK1635T T3 (Seite 9 von 104) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Spanisch, Schwedisch, Norwegisch, Finnisch)

584949

Zoom out

Zoom in

Vorherige Seite

1/104

Nächste Seite

ENGLISH

A guard or other part that is damaged should

be properly repaired or replaced by an

authorised service agent. Do not use your

chainsaw if the switch does not turn it on and

off.

◆ Repairs. This tool complies with relevant safety

requirements. Repairs should only be carried

out by qualified persons using original spare

parts; otherwise this may result in considerable

danger to the user.

Warning! The use of an accessory or

attachment other than those recommended

in this user manual may present a risk of

personal injury.

◆ For all types of cutting, always hold the saw

firmly with both hands, with thumbs and fingers

encircling the saw handles. Do not release your

grip until your chainsaw has stopped moving.

◆ Be sure of your footing and pre-plan a safe exit

from a falling tree or branches.

◆ Use wedges to help control felling and prevent

binding the guide bar and saw chain in the cut.

◆ Keep all parts of your body and clothing away

from the saw chain when running your chainsaw.

Before you switch on make sure your chainsaw

is not contacting anything. Do not touch or try

to stop a moving saw chain with your hand.

◆ Carry your chainsaw carefully with the mains

supply disconnected and with the guide bar

and saw chain to the rear and the blade sheath

fitted.

◆ Keep your chainsaw clean. Do not allow dirt,

oil or sawdust to build up on your chainsaw.

Pay particular attention to the air inlet and

outlet slots; these must not become clogged.

Clean your chainsaw with a dry cloth but do

not use any solvents or cleaning fluids.

◆ Saw chain care. Keep the saw chain sharp and

snug on the guide bar. Ensure the saw chain

and guide bar are clean and well oiled.

Beware of kickback. Kickback is upward/

backward motion of the guide bar that

may occur when the nose of the saw chain

unexpectedly comes in contact with an

object. Hold your chainsaw firmly with

both hands when the motor is running.

Use a firm grip with thumbs and fingers

encircling the handles and watch carefully

what you cut.

Kickback can be caused by:

◆ Striking branches or other objects accidentally

with a tip of the saw while the saw chain is

moving.

◆ Striking metal, cement or any other hard

material near the wood, or buried in the wood.

◆ A dull or loose chain.

◆ Cutting above shoulder height.

◆ Lack of attention when holding or guiding

the saw while cutting.

◆ Over-reaching. Keep proper footing and

balance at all times and do not overreach.

◆ Do not try to insert into a previous cut, as this

could cause kickback. Make a fresh cut every time.

◆ We strongly recommend you do not attempt

to operate your chainsaw while in a tree, on a

ladder or on any other unstable surface. If you

decide to do so, be advised that these

positions are extremely dangerous.

◆ When cutting a branch that is under tension,

be alert for spring back so that you will not be

struck when the tension is released.

◆ Avoid cutting:

◆ Prepared timber.

◆ Into the ground.

◆ Into wire fences, nails, etc.

◆ Into small sized brush and saplings because

slender material may catch the saw chain and

be whipped towards you, or pull you off

balance.

◆ Do not use your chainsaw above shoulder height.

◆ Ensure someone is nearby (but at a safe distance)

in case of an accident.

◆ If for any reason you have to touch the chain,

make sure your chainsaw is disconnected from

the mains.

◆ The noise from this product can exceed 85 dB(A).

We therefore recommend you take appropriate

measures for the protection of hearing.

Warning symbols on your chainsaw

Read all of this manual carefully.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Black Decker GK1635T T3 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Black Decker GK1635T T3

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info