Bedienungsanleitung Black Decker GKC 1000 (Seite 10 von 128) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Schwedisch, Norwegisch, Finnisch)

78140

Zoom out

Zoom in

Vorherige Seite

1/128

Nächste Seite

ENGLISH

d. Store idle power tools out of the reach of children

and do not allow persons unfamiliar with the power

tool or these instructions to operate the power tool.

Power tools are dangerous in the hands of untrained

users.

e. Maintain power tools. Check for misalignment or

binding of moving parts, breakage of parts and any

other condition that may affect the power tools

operation. If damaged, have the power tool repaired

before use. Many accidents are caused by poorly

maintained power tools.

f. Keep cutting tools sharp and clean. Properly

maintained cutting tools with sharp cutting edges are

less likely to bind and are easier to control.

g. Use the power tool, accessories and tool bits etc. in

accordance with these instructions, taking into

account the working conditions and the work to be

performed. Use of the power tool for operations

different from those intended could result in a

hazardous situation.

5. Service

a. Have your power tool serviced by a qualified repair

person using only identical replacement parts. This

will make sure that the safety of the power tool is

maintained.

6. Battery tool use and care

a. Recharge only with the charger specified by the

manufacturer. A charger that is suitable for one type of

battery pack may create a risk of fire when used with

another battery pack.

b. Use power tools only with specifically designated

battery packs. Use of any other battery packs may

create a risk of injury and fire.

c. When battery pack is not in use, keep it away from

other metal objects, like paper clips, coins, keys,

nails, screws or other small metal objects, that can

make a connection from one terminal to another.

Shorting the battery terminals together may cause

burns or a fire.

d. Under abusive conditions, liquid may be ejected

from the battery; avoid contact. If contact

accidentally occurs, flush with water. If liquid

contacts eyes, additionally seek medical help. Liquid

ejected from the battery may cause irritation or burns.

Additional power tool safety warnings

Warning! Never use the tool above shoulder height. Always

position yourself out of the path of falling branches and

debris.

Warning! Do not use this tool to fell trees.

 Keep all parts of your body and clothing away from the

saw chain at all times. Hold the tool in front of you and

be aware of the saw chain position especially when

cutting branches near the ground. Before you switch on

make sure the saw chain is not contacting anything.

 Pre-plan a safe exit from falling branches and debris.

Ensure the exit route is clear of obstacles that would

prevent or hinder movement. Remember wet grass and

freshly cut bark is slippery.

 Be aware of the direction that a branch may fall.

Consider all conditions that may affect the direction of

fall, including:

- The intended direction of fall.

- The natural lean of the branch.

- Any unusual heavy limb structure or decay.

- Surrounding trees and obstacles including overhead

lines.

- The wind speed and direction.

 The safe distance between a branch and debris to be

felled and bystanders, buildings and other objects is at

least 2 1/2 times the length of the branch. Any

bystander, building or object within this distance is at

risk from being struck by the falling branch.

 When cutting a limb that is under tension, be aware of

spring-back. When the tension in the wood fibres are

released the spring loaded limb may strike the operator

and/or throw the tool out of control.

 Always wear suitable safety equipment such as non-

skid safety shoes, hard hat, goggles, ear protection and

gloves when operating the tool.

 Ensure someone is nearby (at a safe distance) in case

of an accident.

 Do not attempt to operate the tool when in a tree, on a

ladder or standing on any other unstable support.

 Keep proper footing and balance at all times.

 Hold the tool firmly with both hands when the motor is

running.

 Keep handles dry, clean and free from oil and grease.

Greasy oily handles are slippery causing loss of control.

 Do not let the moving chain contact any object at the tip

of the guide bar.

Warning! Additional safety warnings for the

Alligator

Lopper.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Black Decker GKC 1000 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info