Bedienungsanleitung Black Decker GKC 1000 (Seite 15 von 128) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Schwedisch, Norwegisch, Finnisch)

78140

Zoom out

Zoom in

Vorherige Seite

1/128

Nächste Seite

ENGLISH

Replacing worn out saw chains

Replacement saw chains are available through retailers or

Black & Decker service agents. Always use genuine spare

parts.

Saw chain sharpness

The saw chain cutters will blunt immediately if they touch the

ground or a nail while cutting.

Saw chain tension

Regularly check the saw chain tension.

What to do if your chainsaw needs repair

Your tool is in accordance with the relevant safety

requirements. Repairs should only be carried out by a

qualified person using original spare parts otherwise this

may result in considerable danger to the user. We

recommend you keep this user manual in a safe place.

Storage

When the tool will not be used for several months, wipe any

metal components with oil. Ideally, leave the battery (6)

connected to the charger.

Proceed as follows:

 Fully charge the battery (6).

 Remove the battery (6) from the tool.

 Store the tool and battery (6) in a secure and dry

location. The storage temperature must always remain

in the range of +5°C to +40°C. Place the battery (6) on

a level surface.

 Before using the tool after prolonged storage, fully

charge the battery (6) again.

Protecting the environment

Should you find one day that your Black & Decker product

needs replacement, or if it is of no further use to you, do not

dispose of it with household waste. Make this product

available for separate collection.

Separate collection of used products and packaging

allows materials to be recycled and used again. Re-

use of recycled materials helps prevent

environmental pollution and reduces the demand

for raw materials.

Local regulations may provide for separate collection of

electrical products from the household, at municipal waste

sites or by the retailer when you purchase a new product.

Black & Decker provides a facility for the collection and

recycling of Black & Decker products once they have

reached the end of their working life. To take advantage of

this service please return your product to any authorised

repair agent who will collect them on our behalf.

You can check the location of your nearest authorised repair

agent by contacting your local Black & Decker office at the

address indicated in this manual. Alternatively, a list of

authorised Black & Decker repair agents and full details of

our after-sales service and contacts are available on the

Internet at: www.2helpU.com.

Batteries

 Do not short-circuit the battery terminals.

 Do not dispose of the battery(s) in a fire as this may

result in a risk of personal injury or an explosion.

 Run the battery down completely, then remove it from

the tool.

 Batteries are recyclable. Place the battery(s) in a

suitable packaging to ensure that the terminals cannot

be short-circuited. Take them to any authorised repair

agent or a local recycling station.

Separate collection. This product must not be

disposed of with normal household waste.

At the end of their useful life, discard batteries with

due care for our environment:

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Black Decker GKC 1000 Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info