Bedienungsanleitung Black Decker GKC1820L H2 (Seite 7 von 140) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Schwedisch, Norwegisch, Finnisch)

585828

Zoom out

Zoom in

Vorherige Seite

1/140

Nächste Seite

ENGLISH

materials. Use of the chainsaw for operations different

than intended could result in a hazardous situation.

 Position the cord so that it will not get caught on

branches or similar when cutting.

 The spiked bumper may become sharp during the

life of the product. Handle with care.

 When handling the product the chain bar may

become hot, handle with care.

Additional power tool safety warnings

The intended use is described in this instruction manual. Do

not use the tool for purposes not intended; for example do

not use the tool to fell trees. The use of any accessory or

attachment or performance of any operation with this tool

other than those recommended in this instruction manual

may present a risk of personal injury.

 Wear close fitting and protective clothing including a

safety helmet with visor/goggles, ear protectors, non-

skid safety footwear, protective bib trousers and strong

leather gloves.

 Always position yourself out of the path of falling

branches.

 The safe distance between a branch to be felled and

bystanders, buildings and other objects is at least 2 1/2

times the length of the branch. Any bystander, building

or object within this distance is at risk from being struck

by the falling branch.

 Pre-plan a safe exit from falling branches. Ensure the

exit route is clear of obstacles that would prevent or

hinder movement. Remember wet grass and freshly cut

bark is slippery.

 Ensure someone is nearby (but at a safe distance) in

case of an accident.

 Do not use the tool while standing in a tree, on a ladder

or on any other unstable surface.

 Keep proper footing and balance at all times.

 Hold the tool firmly with both hands when the motor is

running.

 Do not let the moving chain contact any object at the tip

of the guide bar.

 Start cutting only with the chain moving at full speed.

 Do not attempt to enter a previous cut. Always make a

fresh cut.

 Watch for shifting branches or other forces that could

close a cut and pinch or fall into the chain.

 Do not attempt to cut a branch when the diameter of the

branch exceeds the cutting length of the tool.

 Always remove the battery from the tool and place the

chain cover assembly over the chain when storing or

transporting the tool.

 Keep the saw chain sharp and properly tensioned.

Check the tension at regular intervals.

 Switch the tool off, allow the chain to stop and remove

the battery from the tool before carrying out any

adjustment, servicing or maintenance.

 Only use genuine replacement parts and accessories.

Causes and operator prevention of kickback

Kickback may occur when the nose or tip of the guide bar

touches an object, or when the wood closes in and pinches

the saw chain in the cut.

Tip contact in some cases may cause a sudden reverse

reaction, kicking the guide bar up and back towards the

operator.

Pinching the saw chain along the top of the guide bar may

push the guide bar rapidly back towards the operator.

Either of these reactions may cause you to lose control of the

chainsaw which could result in serious personal injury. Do

not rely exclusively upon the safety devices built into your

chainsaw. As a chainsaw user, you should take several

steps to keep your cutting jobs free from accident or injury.

Kickback is the result of tool misuse and / or incorrect

operating procedures or conditions and can be avoided by

taking proper precautions as given below:

 Maintain a firm grip, with thumbs and fingers encircling

the chainsaw handles. With both hands on the

chainsaw, position your body and arm to allow you to

resist kickback forces. Kickback forces can be

controlled by the operator, if proper precautions are

taken. Do not let go of the chainsaw.

 Do not overreach and do not cut above shoulder height.

This helps prevent unintended tip contact and enables

better control of the chainsaw in unexpected situations.

 Only use replacement guide bars and chains specified

by the manufacturer. Incorrect replacement guide bars

and chains may cause chain breakage and/or kickback.

 Follow the manufacturer's sharpening and maintenance

instructions for the saw chain. Decreasing the depth

gauge height can lead to increased kickback.

Safety recommendations for the chainsaw

 We strongly recommend that first time users obtain

practical instruction in the use of the chainsaw and

protective equipment from an experienced user. Initial

practice should be completed sawing logs on a saw

horse or cradle.

 We recommend that when carrying the chainsaw that

you make sure that the brake is engaged

Warning! Additional safety warnings for compact

chainsaws.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Black Decker GKC1820L H2 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info