Bedienungsanleitung Black Decker GL686 (Seite 5 von 12) (Englisch)

527616

Zoom out

Zoom in

Vorherige Seite

1/12

Nächste Seite

Do not expose the appliance to rain or high humidity.

Do not use heavy duty line in edging mode.

◆ Before using the appliance, check that your cutting path is

free from sticks, stones, wire and any other objects.

◆ Only use the appliance in the correct position, with the

cutting line near the ground, as shown in the illustrations.

Never switch the appliance on in any other position.

◆ Switch on the appliance only when hands and feet are

away from the cutting line.

◆ Avoid body contact with the cutting line while the

appliance is running.

◆ Do not work on steep slopes. Be sure of your footing.

Be aware that freshly cut grass is damp and slippery.

◆ Take care when trimming near borders and gravel paths or

roads, as stones and soil may be moved by the cutting line.

◆ Do not put the appliance down until the cutting line has

come to a complete standstill.

◆ Use only the appropriate type of Black & Decker cutting

line. Never use metal cutting line or fishing line.

◆ After extending new cutting line, always return the

appliance to its normal operating position before

switching on.

◆ Take care to keep the mains cable away from the cutting

line. Always be aware of the position of the cable.

Additional safety instructions for Australia and

New Zealand

◆ This appliance is not intended for use by young or infirm

persons without supervision. Children must be supervised

to ensure they do not play with the appliance.

◆ If the supply cord is damaged, it must be replaced by the

manufacturer or an authorised Black & Decker Service

Centre in order to avoid a hazard.

Features

This tool includes some or all of the following features.

1. Trigger lever (on/off switch)

2. Handle

3. Cable restraint

4. Power inlet

5. Secondary handle

6. Handle knob

7. Adjustment button

8. Cable storage hooks

9. Motor housing

10. Guard

11. Line trimming blade (see fig. F)

12. Spool housing

13. Cutting line

14. Line storage pouch

15. Tube

16. Spool storing position

Assembly

Warning! Before assembly, make sure that the tool is

switched off and unplugged.

Fitting the guard (fig. A)

◆ Remove the screw (17) from the guard (10).

◆ Place the guard onto the tool as shown.

◆ Firmly press the guard until it snaps into place.

◆ Secure the guard with the screw.

Warning! Never use the tool unless the guard is properly fitted.

Fitting the secondary handle (fig. B)

◆ Place the handle (5) on the tool as shown.

◆ Adjust the handle to the most comfortable position.

Use the markings as a guide.

◆ Pass the bolt (6) through the secondary handle and the

main handle.

◆ Screw the bolt into the far side of the secondary handle.

Do not overtighten the bolt.

Storing the spool not in use (fig. C)

The tool has two cutting systems:

◆ Reflex plus: Twin line autofeed for light trimming and

edging.

◆ HDL: Heavy Duty Line cutting system for more overgrown

areas.

The cutting system not in use can be stored in the position

provided (16).

◆ Align the tabs on the cutting head with the cut outs (28)

at the underside of the handle.

◆ Push the cutting head into the handle until it snaps

securely into place.

Storing the heavy cutting line (fig. C)

◆ The unit is supplied with several pieces of spare heavy

cutting line.

◆ The extra pieces of heavy cutting line can be stored

securely in the recess in the handle (14).

Releasing the cutting line

In transit, the cutting line is taped to the spool housing.

◆ Remove the tape holding the cutting line (13) to the spool

housing (12).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Black Decker GL686 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info