Bedienungsanleitung Black Decker GPC1800NM TH1 (Seite 5 von 16) (Englisch)

585881

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

ENGLISH

(Original instructions)

Power tool use and care

• Do not force the power tool. Use the correct

power tool for your application. The correct

power tool will do the job better and safer at the

rate for which it was designed.

• Do not use the power tool if the switch

does not turn it on and off. Any power tool

that cannot be controlled with the switch is

dangerous and must be repaired.

• Disconnect the plug from the power source

and/or the battery pack from the power tool

before making any adjustments, changing

accessories, or storing power tools. Such

preventive safety measures reduce the risk of

starting the power tool accidentally.

• Store idle power tools out of the reach of

children and do not allow persons unfamiliar

with the power tool or these instructions

to operate the power tool. Power tools are

dangerous in the hands of untrained users.

• Maintain power tools. Check for misalign-

ment or binding of moving parts, breakage

of parts and any other condition that may

affect the power tools operation. If dam-

aged, have the power tool repaired before

use. Many accidents are caused by poorly

maintained power tools.

• Keep cutting tools sharp and clean. Prop-

erly maintained cutting tools with sharp cutting

edges are less likely to bind and are easier to

control.

• Use the power tool, accessories and tool

bits etc., in accordance with these instruc-

tions, taking into account the working condi-

tions and the work to be performed. Use

of the power tool for operations different from

those intended could result in a hazardous

situation.

Battery tool use and care

• Recharge only with the charger specied by

the manufacturer. A charger that is suitable

for one type of battery pack may create a risk of

re when used with another battery pack.

• Use power tools only with specically

designated battery packs. Use of any other

battery packs may create a risk of injury and

re.

• When battery pack is not in use, keep it

away from other metal objects, like paper

clips, coins, keys, nails, screws, or other

small metal objects, that can make a con-

nection from one terminal to another. Short-

ing the battery terminals together may cause

burns or a re.

• Under abusive conditions, liquid may be

ejected from the battery; avoid contact.

If contact accidentally occurs, ush with

water. If liquid contacts eyes, additionally

seek medical help. Liquid ejected from the

battery may cause irritation or burns.

Service

• Have your power tool serviced by a qualied

repair person using only identical replace-

ment parts. This will ensure that the safety of

the power tool is maintained.

Additional safety instructions for pole

pruners

The intended use is described in this instruction

manual. Do not use the tool for purposes not

intended; for example do not use the tool to fell

trees. The use of any accessory or attachment or

performance of any operation with this tool other

than those recommended in this instruction manual

may present a risk of personal injury.

• Wear close tting and protective clothing

including a safety helmet with visor/goggles, ear

protectors, non-skid safety footwear, protective

bib trousers and strong leather gloves.

• Always position yourself out of the path of

falling branches.

• The safe distance between a branch to be

felled and bystanders, buildings and other

objects is at least 2 1/2 times the length of the

branch. Any bystander, building or object within

this distance is at risk from being struck by the

falling branch.

• Pre-plan a safe exit from falling trees or

branches. Ensure the exit route is clear

of obstacles that would prevent or hinder

movement. Remember wet grass and freshly

cut bark is slippery.

• Ensure someone is nearby (but at a safe

distance) in case of an accident.

• Do not use the tool while standing in a tree, on

a ladder or on any other unstable surface.

• Keep proper footing and balance at all times.

• Hold the tool rmly with both hands when the

motor is running.

• Do not let the moving chain contact any object

at the tip of the guide bar.

• Start cutting only with the chain moving at full

speed.

• Do not attempt to enter a previous cut. Always

make a fresh cut.

• Watch for shifting branches or other forces that

could close a cut and pinch or fall into the chain.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Black Decker GPC1800NM TH1 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Black Decker GPC1800NM TH1

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info