Bedienungsanleitung Black Decker GPC1820L TH1 (Seite 5 von 116) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Schwedisch, Norwegisch, Finnisch)

585886

Zoom out

Zoom in

Vorherige Seite

1/116

Nächste Seite

ENGLISH

(Original instructions)

d. Store idle power tools out of the reach of children and

do not allow persons unfamiliar with the power tool

or these instructions to operate the power tool. Power

tools are dangerous in the hands of untrained users.

e. Maintain power tools. Check for misalignment or

binding of moving parts, breakage of parts and

any other condition that may affect the power tools

operation. If damaged, have the power tool repaired

before use. Many accidents are caused by poorly

maintained power tools.

f. Keep cutting tools sharp and clean. Properly

maintained cutting tools with sharp cutting edges are less

likely to bind and are easier to control.

g. Use the power tool, accessories and tool bits etc.

In accordance with these instructions, taking into

account the working conditions and the work to be

performed. Use of the power tool for operations different

from those intended could result in a hazardous situation.

5. Battery tool use and care

a. Recharge only with the charger specied by the

manufacturer. A charger that is suitable for one type

of battery pack may create a risk of re when used with

another battery pack.

b. Use power tools only with specically designated

battery packs. Use of any other battery packs may

create a risk of injury and re.

c. When battery pack is not in use, keep it away from

other metal objects, like paper clips, coins, keys,

nails, screws, or other small metal objects, that can

make a connection from one terminal to another.

Shorting the battery terminals together may cause burns

or a re.

d. Under abusive conditions, liquid may be ejected from

the battery; avoid contact. If contact accidentally

occurs, ush with water. If liquid contacts eyes,

additionally seek medical help. Liquid ejected from the

battery may cause irritation or burns.

6. Service

a. Have your power tool serviced by a qualied repair

person using only identical replacement parts. This will

make sure that the safety of the power tool is maintained.

Additional power tool safety warnings

Warning! Additional safety instructions for pole

pruners

The intended use is described in this instruction manual. Do

not use the tool for purposes not intended; for example do

not use the tool to fell trees. The use of any accessory or

attachment or performance of any operation with this tool

other than those recommended in this instruction manual may

present a risk of personal injury.

♦ Hold power tool by insulated gripping surfaces when

performing an operation where the cutting tool may

contact hidden wiring or its own cord. Contact with a “live”

wire will also make exposed metal parts of the power tool

“live” and give the operator an electric shock.

♦ Wear close tting and protective clothing including a

safety helmet with visor/goggles, ear protectors, non-skid

safety footwear, protective bib trousers and strong leather

gloves.

♦ Always position yourself out of the path of falling

branches.

♦ The safe distance between a branch to be felled and

bystanders, buildings and other objects is at least 2 1/2

times the length of the branch. Any bystander, building or

object within this distance is at risk from being struck by

the falling branch.

♦ Pre-plan a safe exit from falling trees or branches. Ensure

the exit route is clear of obstacles that would prevent or

hinder movement. Remember wet grass and freshly cut

bark is slippery.

♦ Ensure someone is nearby (but at a safe distance) in

case of an accident.

♦ Do not use the tool while standing in a tree, on a ladder or

on any other unstable surface.

♦ Keep proper footing and balance at all times.

♦ Hold the tool rmly with both hands when the motor is

running.

♦ Do not let the moving chain contact any object at the tip

of the guide bar.

♦ Start cutting only with the chain moving at full speed.

♦ Do not attempt to enter a previous cut. Always make a

fresh cut.

♦ Watch for shifting branches or other forces that could

close a cut and pinch or fall into the chain.

♦ Do not attempt to cut a branch when the diameter of the

branch exceeds the cutting length of the tool.

♦ Always remove the battery from the tool and place the

chain cover over the chain when storing or transporting

the tool.

♦ Keep the saw chain sharp and properly tensioned. Check

the tension at regular intervals.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Black Decker GPC1820L TH1 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Black Decker GPC1820L TH1

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info