Bedienungsanleitung Black Decker GR290 (Seite 10 von 84) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Spanisch, Schwedisch, Norwegisch, Finnisch)

474459

Zoom out

Zoom in

Vorherige Seite

1/84

Nächste Seite

ENGLISH

◆ The cable wire colours, or a letter, will be

marked at the connection points of most good

quality plugs. Attach the wires to their respective

points in the plug (see above). Brown is for

Live (L) (2), blue is for Neutral (N) (4).

◆ Before replacing the top cover of the mains plug

ensure that the cable restraint (3) is holding the

outer sheath of the cable firmly and that the

leads are correctly fixed at the terminal screws.

◆ If the plug has a fuse cover, make sure that the

fuse cover is fitted. Do not use the plug if the

fuse cover is missing or damaged.

Never use a light socket.

Using an extension cable

Always use an approved extension cable suitable

for the power input of this appliance (see rating

plate). The extension cable must be suitable for

outdoor use.

◆ Before use, inspect the cable for signs of

damage, wear and ageing. Replace the

extension cable if damaged or defective.

◆ When using a cable reel, always unwind the

cable completely.

OVERVIEW (fig. A)

1. On/off switch

2. Lock-off button

3. Switch box

4. Upper handle

5. Lower handle

6. Grass bag

7. Motor cover

8. Wheels

ASSEMBLY

Before assembly, make sure that the tool

is switched off and unplugged.

Assembling the handle (fig. B)

◆ Fit the two lower handle parts (9) to the upper

handle (4) using the screws (10) and nuts (11)

as shown.

Fitting the handle (fig. C)

◆ Insert the ends of the lower handle (5) into the

corresponding holes (12) in the mower.

◆ Press the handle down as far as it will go.

◆ Secure the handle using the screws (13).

Assembling and fitting the grass bag (fig. D1 - D4)

GR270/GR280/GR290

◆ Insert the frame (14) into the bag (15) as shown

(fig. D1).

◆ Secure the frame into the clamping rims (16)

using a spoon handle or a similar rounded tool

(fig. D2). In order to facilitate assembly, work in

the order indicated in fig. D3.

◆ Lift the flap (17) and place the metal frame of

the grass bag into the slot (18) (fig. D4).

GR233

◆ Align the two halves of the grass bag.

◆ Press the two halves together.

◆ Clip the assembled grass bag onto the mower

and let it click into place.

USE

Let the tool work at its own pace.

Do not overload.

Adjusting the height of cut (fig. E)

Disconnect the appliance from the mains

and wait until the blade has stopped

rotating before proceeding.

The height of cut is adjusted by changing the

height of the wheels.

◆ Release the wheels (8) by swivelling them out

of the locked position.

◆ Set the wheels to the desired height setting.

◆ Swivel the wheels back into the locked position,

making sure that all wheels are set to the same

height.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Black Decker GR290 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info