Bedienungsanleitung Black Decker GR3000 (Seite 7 von 72) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Schwedisch, Norwegisch, Finnisch)

55627

Zoom out

Zoom in

Vorherige Seite

1/72

Nächste Seite

ENGLISH

X Press the handle down as far as it will go.

X Secure the handle using the screws (13).

Assembling the upper handle (fig. A)

X Make sure that the cable restraint loop (22) is fitted to

the upper handle prior to assembly.

X Fit the lower handle part (5) to the upper handle (4)

using the knobs (11), washers (10) and screws (9) as

shown.

Securing the motor cable (fig. C)

The motor cable has to be fixed using the cable restraints.

X Clip the one restraint (12) onto the cable leading from

the switchbox to the motor. Secure the restraint to the

lower handle (5).

X Clip the other restraint (12) onto the cable leading from

the switchbox to the motor. Secure the restraint to the

upper handle (4).

Warning! Make sure the mains cable is secured using the

cable restraint loop (22) prior to connecting the plug to the

mains outlet.

Fitting the grass bag (fig. D)

X Lift the flap (14) and place the grass bag (6) over the

lugs.

Use

Warning! Let the appliance work at its own pace. Do not

overload.

Adjusting the height of cut (fig. E)

Warning! Disconnect the appliance from the mains and wait

until the blade has stopped rotating before proceeding.

X Release the wheels by swivelling them out of the locked

position.

X Set the wheels to the desired height setting.

X Swivel the wheels back into the locked position, making

sure that all wheels are set to the same height.

Switching on and off

Switching on

X Hold the handle with both hands and tilt it slightly

downwards to raise the front of the appliance.

X Keep the lock-off button (2) pressed and pull the on/off

switch (3) towards you.

X Release the lock-off button (2).

X Let the appliance return to its working position.

Switching off

X To switch the appliance off, release the on/off switch (3).

Warning! Never attempt to lock a switch in the on position.

Mowing (fig. F)

We recommend to use your mower as outlined in this section

in order to achieve optimum results and to reduce the risk of

cutting the mains cable.

X Place the bulk of the mains cable on the lawn, close to

the starting point (position 1 in fig. F).

X Switch the appliance on as described above.

X Proceed as shown in fig. F.

X Move from position 1 to position 2.

X Turn right and proceed towards position 3.

X Turn left and move towards position 4.

X Repeat the above procedure as required.

Warning! Do not work towards the cable as shown in fig. G.

Emptying the grass bag

X When you see loose grass scattering from beneath the

mower, empty the grass bag.

Warning! Never use the appliance without the grass bag.

Carrying the mower (fig. H)

Warning! Disconnect the appliance from the mains and wait

until the blade has stopped rotating before proceeding.

X The mower can be carried using the convenient carry

handles (8).

Hints for optimum use

X If the grass is longer than approx. 10 cm, make two cuts

to obtain a better finish. First mow at maximum height of

cut, then use a low or medium height of cut.

X In order to achieve optimum results, only mow dry

grass.

Maintenance

Your Black & Decker appliance has been designed to

operate over a long period of time with a minimum of

maintenance. Continuous satisfactory operation depends

upon proper appliance care and regular cleaning.

X Keep the appliance clean and dry.

X Regularly clean the ventilation slots with a clean, dry

paint brush.

X Regularly use a blunt scraper to remove grass and dirt

from the appliance.

X To clean the appliance, use only mild soap and a damp

cloth. Never let any liquid get inside the tool and never

immerse any part of the tool into liquid. Do not use any

abrasive or solvent-based cleaner.

Blade maintenance

X Regularly remove grass and dirt from the blade.

X At the beginning of the gardening season, carefully

examine the condition of the blade.

X If the blade is very blunt, sharpen or replace the blade.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Black Decker GR3000 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Black Decker GR3000

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info