Bedienungsanleitung Black Decker GR346 (Seite 4 von 16) (Englisch)

529726

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

Note: Fuses do not give personal protection

against electric shock.

Plug replacement

• Disconnect the plug from the supply.

• Cut off the plug and dispose of

immediately. Insertion of a detatched

plug into a 13 amp socket outlet may

result in electric shock.

• Only fit BS1363A approved plugs fitted

with the correctly rated fuse.

• The cable wire colours, or a letter, will be

marked at the connection points of most

good quality plugs. Attach the wires to

their respective points in the plug (see

below). Brown is for “Live” (L) and blue is

for “Neutral” (N).

• Before replacing the top cover of the

mains plug ensure that the cable clamp

is holding the outer sheath on the cable

firmly and that the two leads are correctly

fixed at the terminal screws.

Fit a BS1363A

approved

resilient plug

Connect blue

to N (neutral)

Make sure that the

outer sheath of the

cable is held firmly

by the clamp

Fit the recommended

fuse approved

to BS1362

Connect brown

to L (live)

230 volts AC only

Never use a light

socket

Warning! Never connect live or neutral wires

to the earth pin marked “E” or .

Note: Do not wire an extension cable directly

into your mower yourself. Instead, take your

mower to your nearest Black & Decker

service agent.

Increased safety can be obtained by having

a qualified electrician install a high sensitivity

(30mA) circuit breaker in the house wiring.

If you do not have such a circuit breaker

installed, or you do not wish to have one

installed, then we strongly recommend that

the electrical power to your mower be

supplied through a high sensitivity (30mA)

residual current device (RCD). The RCD is

designed to provide a high degree of

personal protection against harmful electric

current should fault conditions occur.

Warning! The use of an RCD or other circuit

breaker unit does not release the operator of

your mower from the safety instructions and

safe working practices given in this manual.

Handle assembly (Fig. A & B)

Remove the contents of the carton and

familiarise yourself with the individual parts

of your mower.

The main parts of your mower are as follows:

• Mower body (1) - this comprises the

motor cover (3), wheels (4), grass flap (5).

• Handle - upper handle (8), lower

handle (9R & 9L), switch box (10), switch

lever (11), safety lock-off (12), electric

cable (13), cable clips (14), handle

assembly (wing nut and bolt) (15).

• Join the upper and lower handles by

screwing them together using the wing

nuts and bolts provided.

To assemble the lower handles into the

correct locations on your mower body,

proceed as follows:

• Insert the lower handles (9) into the two

holes in your mower body (1) and press

down until secure. Secure in position

using the screws supplied (6).

Height of cut adjustment (Fig. C)

Warning! Disconnect your mower from

the electrical supply before making any

adjustment and allow the blade to stop

rotating. Cutting blades are sharp.

The wheels are already pre-mounted.

To select a height of cut, move the wheels (4)

into the slot required using the spring system

(21). To ensure an even cut, please make

sure that all four wheels are placed in the

same position.

Grassbox assembly (Fig. D)

Read the safety instructions at the beginning

of this manual before using this accessory.

• The grassbox is a two piece (14 & 15)

plastic construction which needs to be

assembled before attaching it to your

mower.

To assemble the grassbox, proceed as

follows:

• Align both parts together and clip in

place.

Fitting the grassbox to your mower:

• The spring loaded grass flap is lifted and

the two arms on the front edge of the

grassbox are located behind the two lugs

rising up from the rear edge of the cutter

deck.

• The grass flap can now be released to

lock the grassbox into position.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Black Decker GR346 Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info