Bedienungsanleitung Black Decker GRC4700 (Seite 13 von 144) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Schwedisch, Norwegisch, Finnisch)

474478

Zoom out

Zoom in

Vorherige Seite

1/144

Nächste Seite

ENGLISH

 Carefully file the cutting edges of the blade with a fine

tooth file or a sharpening stone, maintaining the original

cutting edge.

 Check the balance of the blade, see the instructions for

blade balancing.

 Install the blade (36) on the mower and tighten securely,

see the instructions for removing and installing blades.

Blade balancing (fig. U)

 Check the balance of the blade by putting the centre

hole in the blade on to a nail or a round shank

screwdriver that is clamped horizontally in a vice. If

either end of the blade rotates downward, file that end

of the blade until the blade is balanced.

Lubrication

No lubrication is necessary. Do not oil the wheels. They have

plastic bearing surfaces which require no lubrication.

Cleaning

 Release the bail bar (2) to turn the lawnmower off and

wait for the blade to come to a complete stop.

 Remove the safety key.

 Use only mild soap and a damp cloth to clean the

mower.

 Use a blunt tool to clean out any clippings which may

have accumulated on the underside of the mower.

 After several uses, check all exposed fasteners for

tightness.

Preventing corrosion

Fertilisers and other garden chemicals contain agents which

greatly accelerate the corrosion of metals. If you mow in

areas where fertilisers or chemicals have been used, the

mower should be cleaned immediately afterward as follows:

 Release the bail bar (2) to turn the lawnmower off and

wait for the blade to come to a complete stop.

 Remove the safety key (1).

 Wipe all exposed parts with a damp cloth.

Transporting and storage

Warning! The rotating blade can cause serious injury.

Release bail bar to turn mower off and remove the safety key

before lifting, transporting or storing the mower. Store in a

dry place.

Note: The mower will not be as heavy to lift if the battery

pack is removed first. Do not use the latch as a lift point for

the mower.

Out of season storage

In warm climates, to ensure optimal performance it is

recommended that the battery is maintained on constant

charge.

The battery may be stored with the charger disconnected if

the following conditions are met.

 The battery is fully charged before storing.

 The average temperature of the storage location is

below 10°C (50°F).

Hints for optimum use

Note: Storage duration is less than six months.

Lawns should first be mowed in the spring when the grass is

about 63 mm to 76 mm high. Mowing too early in the season

restricts the root systems of the grass which renew

themselves every spring. New grass should be mowed when

it is about 63 mm high.

Do not remove too much grass blade surface at one time,

never more than 1/3 of the leaf height during each cutting.

Cutting too close ‘shocks' sensitive grass blades, resulting in

a shallow root system making it more difficult for your lawn

to reach water in the soil.

Mow your lawn when it is dry to avoid clumping of wet grass.

If you have a choice, late afternoon is the ideal time for

mowing, not only because the grass is dry, but also because

the sensitive new cut area of the grass will not be exposed

to intense sunlight.

Keep the mowing blade sharp for a nice clean cut. This

improves the mower's performance and enhances the look

of your lawn. A dull blade shatters and bruises the tips of the

grass. This impairs the healthy growth of your lawn and

increases the susceptibility to turf diseases. If the grass tips

are bruised it causes a brownish colour which gives your

lawn an unhealthy appearance. A dull blade may also pull up

young grass seedlings.

Try to mow your lawn at a consistent cutting height. While

there are times when you should vary the cutting height with

the changing seasons, a consistent cutting height produces

a healthier, lovelier lawn with generally fewer weeds. Mow

more frequently during periods of fast growth. Frequent

cutting ensures that the lower, less attractive portion of the

grass will not show.

If your lawn has grown too long, during a vacation for

example, mow at a cutting height one or two positions higher

than normal. A second pass at your usual cutting height a

few days later will put your lawn back on schedule. Changing

the cutting height is a simple matter with Black & Decker's

One Touch Wheel Height Adjustment, which simultaneously

adjusts all four wheels at once.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Black Decker GRC4700 Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info