Bedienungsanleitung Black Decker GRC4736SD (Seite 9 von 152) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Spanisch, Schwedisch, Norwegisch, Finnisch)

474479

Zoom out

Zoom in

Vorherige Seite

1/152

Nächste Seite

ENGLISH

(Original instructions)

Features

This appliance includes some or all of the following features.

1. Safety key

2. Bail bar

3. Self drive bail handle

4. Speed control lever

5. Handle bar

6. Spring loaded rear door

7. Handle adjust knob

8. Handle attachment bolts

9. Battery clasp

10. Battery lever

11. Removable battery

12. Mulch - On Demand knob

13. Cutting height lever

14. Cutting height indicator

15. Grass bag

Assembly

Warning! Before assembly, make sure that the tool is

switched off and unplugged.

Unpacking (g. A & B)

Warning! Pinch point - to avoid being pinched, keep ngers

away from the area between the handle and the plates.

u Carefully cut down the sides of the box on the opposite

end of the handle and fold the ap down as shown.

u With the carton side cut open, remove the cardboard

ller, charger, accessory bag and grass bag and push the

mower out of the opened carton.

Warning! Sharp moving blade. Keep body parts away from

the blade.

Handle assembly (g. C)

Tools required for assembly, not supplied: Adjustable or 1/2

inch (13mm) wrench.:

u Position the handle so that the handle (5) holes line up

with the plate (16) holes. The handle quick adjust knobs

(7) will line up with the side plate (16) top holes.

u Place handle attachment bolts (8) through the handle (5)

holes and thread into the plate (16). Before tightening

repeat for other side.

u Tighten handle attachment bolts (8) securely using adjust-

able or 1/2 inch (13mm) wrench.

u To set desired handle height refer to handle adjustment.

Do not push or use mower unless handle is properly

fastened and secured to mower.

Warning! Pinch point - to avoid being pinched, keep ngers

away from the area between the handle (5) and the plates

(16).

Handle adjustment (g. D)

Your mower has a variable height handle adjustment feature.

To adjust the handle position to suit your height preference,

use the following procedure:

u Hold handle (5) with one hand, pull out and rotate one

handle adjust knob (7) a quarter-turn to release the pin

from the metal plate hole.

u Repeat for the opposite side. Now the handle (5) is free to

move into another handle height position.

u Move the handle to desired height position.

u Pull out and rotate one handle adjust knob (7) a quarter-

turn to re-engage the pin in the metal plate hole, repeat for

the opposite side.

Assembling the grass bag (g. E & F)

u Slide the grass bag (15) onto the frame (17).

u Assemble the top clips of the grass bag to the frame.

u Assemble the two side clips to the frame, followed by the

bottom clip.

Wheel height adjustment (g. G & H)

Your mower features the Black & Decker One-Touch Wheel-

Height adjustment system. This system will adjust all four

wheels at the same time.

The mower has seven blade height adjustment positions (38

mm to 89 mm). Refer to the scale and pointer at the front

of the mower. The pointer will indicate the height setting for

cutting your lawn. This setting can be a reference for the next

time you want to cut your lawn to the same height.

u Release the bail bar (3) to turn the lawnmower off, wait

until the blade stops and remove the safety key (1).

u To raise or lower the cutting height, place the palm of your

hand on the palm rest (18) and with your ngers, squeeze

upward on the nger grip (19) and hold.

u While holding the nger grip (19), raise or lower the cutting

height as required. The height indicator will show the cur-

rent setting (g. H).

u When the mower is at the required height, hold it in place

with your left hand on the lower right handle bar and

release the nger grip (19) to lock the height adjustment.

Note: To make sure that the mower is securely locked in

one of the eight positions, press down on the palm rest after

releasing the nger grip.

Removing and tting the battery (g. I & K)

The battery pack (11) can be removed from the mower for

storage/charging or left in the mower for charging.

Before removing the battery:

u Place the mower on level ground.

u Release the bail bar (3) to turn the mower off, wait for the

blade to stop and remove the safety key (1).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Black Decker GRC4736SD Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info