Bedienungsanleitung Black Decker GT340 (Seite 10 von 84) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Schwedisch, Norwegisch, Finnisch)

497027

Zoom out

Zoom in

Vorherige Seite

1/84

Nächste Seite

ENGLISH

Switching on and off (fig. A)

For your safety, this tool is equipped with a

double switching system. This system prevents

starting the tool inadvertently and will only allow

operation while holding the tool with both hands.

Switching on

◆ Squeeze both the front handle switch (1) and

the trigger switch (2).

Switching off

◆ Release the front handle switch (1) or the

trigger switch (2).

Never attempt to lock a switch in the on

position.

Hints for optimum use

◆ Slightly tilt the tool (up to 15° relative to the

line of cut) so that the blade tips point slightly

towards the hedge (fig. D). This will cause the

blades to cut more effectively.

◆ Start by trimming the top of the hedge.

Hold the tool at the desired angle and move it

steadily along the line of cut. The double-sided

blade allows you to cut in either direction.

◆ In order to obtain a very straight cut, stretch a

piece of string along the length of the hedge

at the desired height. Use the string as a

guideline, cutting just above it.

◆ In order to obtain flat sides, cut upwards with

the growth. Younger stems move outwards

when the blade cuts downwards, causing

shallow patches in the hedge.

◆ Take care to avoid any foreign objects.

Especially avoid hard objects such as metal wire

and railings, as these could damage the blades.

◆ Regularly oil the blades.

Guidelines for trimming (UK & Ireland)

◆ Trim hedges and shrubs with seasonal leaves

(new leaves every year) in June and October.

◆ Trim evergreens in April and August.

◆ Trim conifers and other fast growing shrubs

every six weeks from May until October.

Guidelines for trimming (Australia & New Zealand)

◆ Trim hedges and shrubs with seasonal leaves

(new leaves every year) in December and March.

◆ Trim evergreens in September and February.

◆ Trim conifers and other fast growing shrubs

every six weeks from October until March.

MAINTENANCE

Your Black & Decker tool has been designed to

operate over a long period of time with a

minimum of maintenance. Continuous satisfactory

operation depends upon proper tool care and

regular cleaning.

Before performing any maintenance,

switch off and unplug the tool.

◆ After use, carefully clean the blades.

After cleaning, apply a film of light machine oil

to prevent the blades from rusting.

◆ Regularly clean the ventilation slots in your tool

using a soft brush or dry cloth.

◆ Regularly clean the motor housing using a

damp cloth. Do not use any abrasive or

solvent-based cleaner.

PROTECTING THE ENVIRONMENT

Black & Decker provides a facility for

recycling Black & Decker products once

they have reached the end of their

working life. This service is provided free

of charge. To take advantage of this

service please return your product to any

authorised repair agent who will collect

them on our behalf.

You can check the location of your nearest

authorised repair agent by contacting your local

Black & Decker office at the address indicated in

this manual. Alternatively, a list of authorised

Black & Decker repair agents and full details of our

after-sales service and contacts are available on

the Internet at: www.2helpU.com.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Black Decker GT340 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info