Bedienungsanleitung Black Decker GT460 (Seite 8 von 84) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Schwedisch, Norwegisch, Finnisch)

497029

Zoom out

Zoom in

Vorherige Seite

1/84

Nächste Seite

ENGLISH

◆ Only fit 13 Amperes BS1363A approved plugs

fitted with the correctly rated fuse (1).

◆ The cable wire colours, or a letter, will be

marked at the connection points of most good

quality plugs. Attach the wires to their respective

points in the plug (see above). Brown is for

Live (L) (2), blue is for Neutral (N) (4).

◆ Before replacing the top cover of the mains

plug ensure that the cable restraint (3) is

holding the outer sheath of the cable firmly

and that the leads are correctly fixed at the

terminal screws.

◆ If the plug has a fuse cover, make sure that the

fuse cover is fitted. Do not use the plug if the

fuse cover is missing or damaged.

Never use a light socket.

Using an extension cable

Always use an approved extension cable suitable

for the power input of this tool (see technical

data). The extension cable must be suitable for

outdoor use and marked accordingly. When using

a cable reel, always unwind the cable completely.

Cable connection system

Black & Decker continually makes every effort to

achieve the highest standards in performance,

quality and reliability. We recommend the use of a

new outdoor cable connection system, which

gives additional protection against the possibility

of water or moisture entering into the cable

connector during normal use.

The new connection system does not

release the operator of the tool from the

safety precautions and safe working

practices given in the manual.

Particular attention is drawn to the fact

that this connection system is ‘weather

resistant’, but not suitable for immersion,

submersion or being subjected to water

jets. Take care to prevent the cable from

lying in or trailing through pools of water

or from splashing with hose pipes.

The following items are available:

A6615 20 m cable, socket, 13 Amp plug

A6616 20 m cable, socket, 13 Amp plug and

Cable Tidy frame

A6617 30 m cable, socket, 13 Amp plug and

Cable Tidy frame

A6613 40 m cable, socket, 13 Amp plug and

Cable Tidy reel

Existing cable systems

Your tool either comes with a cable attached

(the cat. no. ends with a C) or with a male connector

built into the tool. If you already own an outdoor

cable system with the old female connector shown

below, we recommend that you replace this

connector with the new female connector, which is

available from most major DIY outlets and from

Black & Decker service centres (cat. no. A6624S).

old female connector new female connector

Follow the instructions supplied with the connector.

If in doubt, consult a qualified electrician.

Existing outdoor tools

To connect existing Black & Decker outdoor tools

to the new system, you will need an adaptor (see

below), which is available as an accessory from

most major DIY outlets and from Black & Decker

service centres (cat. no. A6623S).

This adaptor is only suitable for products

rated up to 500 W. It is not recommended

for use with hover mowers, rotary mowers

with grass collection, chainsaws, shredders

and blower vacs. Please contact your local

service centre if you need further advice.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Black Decker GT460 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info