665759
8
Zoom out
Zoom in
Vorherige Seite
1/88
Nächste Seite
8
ENGLISH
Regularly clean the motor housing using a clean damp
cloth. Do not use any abrasive or solvent-based
cleaner.
Make sure all switches are free of debris before
and after use.
Removing the guard (fig. B)
Warning! Remove the guard for servicing purpose only.
Always re-fit the guard after servicing.
Remove the screws (8).
Slide the guard (6) off the tool.
Troubleshooting
If the tool does not operate correctly, check the following:
Protecting the environment
Should you find one day that your Black & Decker product
needs replacement, or if it is of no further use to you, do not
dispose of it with household waste. Make this product
available for separate collection.
Separate collection of used products and packaging
allows materials to be recycled and used again.
Re-use of recycled materials helps prevent
environmental pollution and reduces the demand
for raw materials.
Local regulations may provide for separate collection
of electrical products from the household, at municipal waste
sites or by the retailer when you purchase a new product.
Black & Decker provides a facility for the collection and
recycling of Black & Decker products once they have
reached the end of their working life. To take advantage
of this service please return your product to any authorised
repair agent who will collect them on our behalf.
You can check the location of your nearest authorised repair
agent by contacting your local Black & Decker office at the
address indicated in this manual. Alternatively, a list
of authorised Black & Decker repair agents and full details
of our after-sales service and contacts are available on the
Internet at: www.2helpU.com.
Technical data
Vibration total values (triax vector sum) according to
EN 60745:
Vibration emission value (a
h
) 4.6 m/s
2
,
uncertainty (K) 1.5 m/s
2
Fault Possible
cause
Action
Tool will not start Blown fuse Replace fuse
Tripped RCD Check RCD
Mains lead
disconnected
Check mains supply
Separate collection. This product must not be
disposed of with normal household waste.
GT5026
TYPE 1
GT6025
TYPE 1
GT6026
TYPE 1
GT6030
TYPE 1
GT6530
TYPE 1
GT7026
TYPE 1
GT7030
TYPE 1
Voltage Vac 230 230 230 230 230 230 230
Power input W 600 600 650 650 650 700 700
Blade strokes (no load) min-1 1400 1400 1400 1400 1400 1400 1400
Blade length cm 50 60 60 60 65 70 70
Blade gap mm26262630302630
Blade brake time s <1.0 <1.0 <1.0 <1.0 <1.0 <1.0 <1.0
Weight (without supply cord) kg 4.5 4.75 4.75 4.75 4.8 4.9 4.9
8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Black Decker GT5026 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info