Bedienungsanleitung Black Decker GTC36552PC (Seite 9 von 96) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Schwedisch, Norwegisch, Finnisch)

665810

Zoom out

Zoom in

Vorherige Seite

1/96

Nächste Seite

ENGLISH

(Original instructions)

u Insert two screws into the openings on the side of the

guard, tighten securely.

u Slide the bail handle (6) onto the front of the trimmer

housing behind the guard as shown in Figure F.

u Insert the remaining four screws into the openings on the

sides of the bail handle and tighten securely.

Use

Warning! Let the tool work at its own pace. Do not overload.

Switch

u To turn the unit on, push the lock off button (2) down,

squeeze the trigger (1) and depress the dual switch bail

handle (6) as shown in gure G. Once the unit is running,

you may release the lock-off button.

In order to keep the unit running you must continue to

squeeze the trigger.

u To turn the unit off, release the trigger.

Warning! Never attempt to lock a switch in the ON position.

Trimming instructions

u Maintain proper footing and balance and do not overreach.

Wear safety goggles, non-skid footwear when trimming.

u Hold the unit rmly in both hands and turn the unit ON.

u Always hold the trimmer, as shown in the illustrations in

this manual, with one hand on the switch handle and one

hand on the bail handle (gure H).

u Never hold the unit by the blade guard.

Trimming new growth (Fig. I)

u A wide, sweeping motion, feeding the blade teeth through

the twigs is most effective.

u A slight downward tilt of the blade, in the direction of mo-

tion gives the best cutting.

Warning! Do not cut stems greater than 19mm. Use the

trimmer only for cutting normal shrubbery around houses and

buildings.

Level hedges (Fig. J)

u To obtain exceptionally level hedges a piece of string can

be stretched along the length of the hedge as a guide.

Side trimming hedges (Fig. k)

u Hold the trimmer as shown and begin at the bottom and

sweep up.

POWERCOMMAND

u If you encounter a jam, depress the POWERCOMMAND

button (4) shown in Figure L. The blades will move back

and forth in a slower, more forceful rhythm to help cut

through difcult branches. Release the button to return to

normal hedge trimming usage.

Note: Once the button is released, the blades will immediately

return to full speed.

Note: The blades will stop when the button is held for 15

seconds. To reengage the POWERCOMMAND feature,

release the button and depress it again.DO NOT continuously

hold the POWERCOMMAND button during normal hedge

trimming.

Maintenance

Your BLACK+DECKER corded/cordless appliance/tool has

been designed to operate over a long period of time with a

minimum of maintenance.

Continuous satisfactory operation depends upon proper tool

care and regular cleaning.

Lubrication oil is available from your BLACK+DECKER dealer

(cat. no. A6102-XJ).

Warning! Before performing any maintenance on corded/

cordless power tools:

u Switch off and unplug the appliance/tool.

u Or switch off and remove the battery from the appliance/

tool if the appliance/tool has a separate battery pack.

u Or run the battery down completely if it is integral and then

switch off.

u Unplug the charger before cleaning it. Your charger does

not require any maintenance apart from regular cleaning.

u Regularly clean the ventilation slots in your appliance/tool/

charger using a soft brush or dry cloth.

u Regularly clean the motor housing using a damp cloth. Do

not use any abrasive or solvent-based cleaner.

u After use, carefully clean the blades. After cleaning, apply

a lm of light machine oil to prevent the blades from

rusting.

Mains plug replacement (U.K. & Ireland only)

If a new mains plug needs to be tted:

u Safely dispose of the old plug.

u Connect the brown lead to the live terminal in the new

plug.

u Connect the blue lead to the neutral terminal.

Warning! No connection is to be made to the earth terminal.

Follow the tting instructions supplied with good quality plugs.

Recommended fuse: 5 A.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Black Decker GTC36552PC Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info