Bedienungsanleitung Black Decker GW2500 T1 (Seite 9 von 120) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Schwedisch, Norwegisch, Finnisch)

586349

Zoom out

Zoom in

Vorherige Seite

1/120

Nächste Seite

ENGLISH

(Original instructions)

Features

1. On/off switch

2. Handle

3. Blow tube release button

4. Blow tube (2 pieces)

5. Vacuum tube (2 pieces)

6. Fan cover

7. Cable restraint

8. Collection bag

9. Strap

Assembly

Warning! Before assembly, make sure that the

appliance is switched off and unplugged.

Warning! Always wear protective gloves and

safety glasses when working with your blow vac.

Vacuum tube assembly (g. A)

The vacuum tubes must be assembled together before use.

u To ease assembly, apply a soapy water solution to the

joint area.

u Align the notches (10) and the tabs (11) on the lower and

upper vacuum tubes.

u Push the lower vacuum tube (5) rmly onto the upper

vacuum tube (5), until the tabs click into place.

u Insert the screw provided into the rear of the vacuum tube.

Note: Do not separate the tubes once assembled.

Blow tube assembly (g. B)

u Align the notch (12) and the tab (13) on the lower and

upper blow tubes.

u Push the lower blow tube (4) rmly onto the upper blow

tube (4) until the tab clicks into place.

Warning! Do not separate the tubes once assembled.

Use

Switching on and off (g. C)

Warning! Grip the product rmly when switching on.

u To switch the unit on, turn the on/off switch (1) clockwise

to the on position I.

u To switch the unit off, turn the on/off switch (1) anti-

clockwise to the off position 0.

Cable restraint (g. D)

A cable restraint (7) is incorporated into the rear of the

powerhead.

u Loop the cable through the cable restraint (7).

Using your product

Warning! When using as a blower or vacuum, always wear

safety glasses. If using in dusty conditions, wear a lter mask

as well.

Warning! Switch off your unit, allow the fan to stop and

remove the plug from the socket before carrying out any

adjustment, servicing or maintenance.

Blow mode (g. E & F)

Warning! Never operate in blow mode without the blow tube

and fan cover rmly in place.

u Attach the blow tube (4) to the fan outlet on the power

head (g. E), push the blow tube rmly towards the unit

until the blow tube release button engages. (g. 3).

u Hold the blow tube approximately 180 mm above the

ground, switch on the unit and using a sweeping motion

from side to side, advance slowly keeping the accumu-

lated debris/leaves in front of you (g. F).

u Once you have blown the debris/leaves into a pile, you

can convert to vacuum mode to collect the debris.

Removing the blow tube

u To disconnect the blow tube (4) press the blow tube

release button (3) and pull the tube off, making sure that

the tube does not fall to the ground.

Vacuum mode (g. G, H, I & J)

Note: For vacuuming, the collection bag (8) must be tted.

u Remove blow tube (4) if attached.

u Push the collection bag (8) rmly onto the fan outlet on the

power head until the blow tube release button (3) engages

(g G).

u Unlatch the fan cover (6) from the bottom of the power

head by pressing the vacuum tube release button (14)

located near the front of the power head and pulling the

fan cover (6) open like a lid (g. H).

Note: This interlock will disconnect the electric circuit automat-

ically and the unit will not operate.

u Attach the vacuum tube (5) to the fan inlet on the power

head (g. I), insert the vacuum tube support tab (15) into

the assembly slot (g. H) on the power head.

u Push the vacuum tube towards the unit until it clicks into

place.

Note: This interlock will connect the electric circuit automati-

cally and the unit will operate.

u Place the strap from the collection bag over your shoulder

(g. J) this will support the additional weight as the collec-

tion bag lls.

u Position the vacuum tube slightly above the debris/leaves.

Switch on the unit and use a sweeping motion; the debris/

leaves will be sucked up the tube and thrown into the

collection bag (8).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Black Decker GW2500 T1 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info