Bedienungsanleitung Black Decker GW254 T4 (Seite 9 von 60) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch)

586137

Zoom out

Zoom in

Vorherige Seite

1/60

Nächste Seite

Maintenance and storage

• Store your product in a dry place when

not in use, out of the reach of children.

• Do not use solvents or cleaning fluids to

clean your product - use a blunt

scraper to remove grass and dirt.

Always disconnect from the electrical

supply before cleaning.

• Do not operate your product if any

parts are defective; discard all defective

parts and fit new parts before use.

• Keep all nuts, bolts and screws tight to

be sure your product is in a safe

working condition.

• Use only Black & Decker recommended

replacement parts and accessories.

• Replacement fans are available from a

Black & Decker service agent.

Warning! If the supply cord is damaged,

it must be replaced by a special cord or

assembly available from an authorised

repair agent (Black & Decker part number:

372832-01 - UK only and part number:

370017-04 - Australia and New Zealand only).

The Black & Decker policy is one of continuous

improvement to their product and as such they

reserve the right to change product specification

without prior notice.

Double insulation

Your product is double insulated. This

means that all external metal parts are

electrically isolated from the power supply.

This is achieved by placing an extra

insulation barrier between the electrical and

mechanical parts. Double insulation means

greater electrical safety and obviates the

necessity of having your product earthed.

Electrical safety (UK only)

Your product should always be switched off at the

mains before disconnecting any plug and socket

connector or extension cables.

Fuse replacement

If your product is supplied with cable, fitted with a

non-re-wireable plug:

• The plug is fitted with a 13 amp fuse which is

the recommended fuse for your product.

• Only use replacement fuses which are

approved to BS1362.

• When changing the fuse in your plug, always

ensure the fuse cover is refitted. If the fuse cover

is missing or damaged do not use the plug.

Note: Fuses do not give personal protection

against electric shock.

Plug replacement

• Disconnect the plug from the supply.

• Cut off the plug and dispose of immediately.

Insertion of a detached plug into a 13 amp

socket outlet may result in electric shock.

• Only fit BS1363A approved plugs fitted with the

correctly rated fuse.

• The cable wire colours, or a letter, will be

marked at the connection points of most good

quality plugs. Attach the wires to their

respective points in the plug (see above).

Brown is for “Live” (L) and blue is for “Neutral”

(N).

• Before replacing the top cover of the mains

plug ensure that the cable restraint is holding the

outer sheath on the cable firmly and that the

two leads are correctly fixed at the terminal screws.

Fit a BS1363A

approved

resilient plug

Connect blue

to N (neutral)

Make sure that the

outer sheath of the

cable is held firmly

the clam

Fit the recommended

fuse approved

to BS1362

Connect brown

to L (live)

230 volts AC only

Never use a light

socket

Warning! Never connect live or neutral

wires to the earth pin marked “E” or .

Note: Do not wire an extension cable directly into

your machine yourself. Instead, take your product

to your nearest Black & Decker authorised repair

agent.

Increased safety can be obtained by having a

qualified electrician install a high sensitivity (30mA)

circuit breaker in the house wiring. If you do not

have such a circuit breaker installed, or you do not

wish to have one installed, then we strongly

recommend that the electrical power to the

machine be supplied through a high sensitivity

residual current device (RCD). The RCD is designed

to provide a high degree of personal protection

against harmful electric current should fault

conditions occur.

ENGLISH

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Black Decker GW254 T4 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Black Decker GW254 T4

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info