Bedienungsanleitung Black Decker GW2810 (Seite 10 von 124) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Schwedisch, Norwegisch, Finnisch)

527494

Zoom out

Zoom in

Vorherige Seite

1/124

Nächste Seite

ENGLISH

(Original instructions)

Warning! Switch off your product, allow the fan to stop and

remove the plug from the socket before carrying out any

adjustment, servicing or maintenance.

Blow mode (g. H and I)

u Attach the fan cover (22) to the powerhead (11) by locat-

ing the assembly as indicated by the arrow, then pivot

about this point and press the vac release button (9) until

the catch (23) is fully engaged. (g. H)

u Align the assembled blow tube with the power head (11).

u Push the assembled blow tube onto the vacuum outlet

(25) until the lock engages tightly with the blow tube.

Warning! Never operate in Blow mode without the blow tube

and fan cover rmly in place.

u Hold the blow tube approximately 180 mm above the

ground, switch on the appliance and using a sweeping

motion from side to side, advance slowly keeping the

accumulated debris/leaves in front of you (g. I).

u Once you have blown the debris/leaves into a pile, you

can convert to vacuum mode to collect the debris.

Removing the blow tube and fan cover

u To disconnect the blow tube press the bag release button

(10) and pull the tube off, making sure that the tube does

not fall to the ground.

u To disconnect the fan cover (22) press the vac release

button (9) and pull the fan cover (22) off, making sure that

the fan cover does not fall to the ground.

Vacuum mode (g. H, J & K)

Note: For vacuuming/shredding, the collection bag (3) must

be tted.

u Remove the fan cover (22) by pressing the vac release

button (9) and pulling the fan cover (22) off, making sure

that the fan cover does not fall to the ground.

u Attach the collection bag (3) to the vacuum outlet (25) by

pressing it rmly on till it clicks into place.

u Attach the assembled vacumm tube to the powerhead (11)

by locating the assembly as indicated by the arrow, then

pivot about this point and press the vac release button (9)

until the catch is fully engaged.

u Place the strap from the collection bag over your shoulder

(g. K) this will support the additional weight as the

collection bag lls. Alternatively the collection bag can be

clipped to the support bracket (28 - g. A) on the upper

vacuum tube (4) and the strap can be tted to the power-

head (11) on the hook (29).

u Position the vacuum tube slightly above the debris/leaves.

Switch on the appliance and use a sweeping motion; the

debris/leaves will be sucked up the tube, shredded and

thrown into the collection bag (g. K).

u As the bag lls, the power of the suction will decrease,

switch off the appliance and unplug from the mains power

supply.

u Unzip the bag to empty the contents before continuing to

operate.

Warning! Never remove the collection bag without rst turning

off and unplugging the appliance.

Note: If the suction decreases and the bag is not full, the

vacuum tube is probably clogged with debris. Turn off and

unplug the vacuum and clear the tube before continuing.

Troubleshooting

Problem Possible sollution

Failure to operate Check the connection to the power supply.

Check the fuse in the plug, if blown, replace

(UK only).

Check that the blow/vacuum tube assembly is

correctly tted to the powerhead

If the fuse continues to blow - immediately

disconnect from the mains power supply and

consult your local Black & Decker authorised

repair agent.

Poor vacuum/high pitched

whine

Switch off - disconnect from the mains power

supply, debris should fall clear of the tube.

Remove and empty the collection bag.

Check that both the inlet and exit ports on the

vacuum tube are clear.

Remove any debris from the fan area.

If poor vacuuming continues - immediately

disconnect from the mains power supply and

consult your local Black & Decker authorised

repair agent.

Poor shredding

Switch off - disconnect from the mains power

supply and remove the collection bag.

Remove the vacuum tube and inspect the

fan.

Clean any debris from the fan blades.

If the fan is cracked or damaged, do not use

- consult your local Black & Decker

authorised repair agent.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Black Decker GW2810 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info