Bedienungsanleitung Black Decker GWC1800 TYPE H1 (Seite 6 von 88) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Schwedisch, Norwegisch, Finnisch)

527501

Zoom out

Zoom in

Vorherige Seite

1/88

Nächste Seite

ENGLISH

(Original instructions)

u If the supply cord is damaged, it must be replaced by the

manufacturer or an authorised Black & Decker Service

Centre in order to avoid a hazard.

Features

1. Blow tube

2. Blower

3. On/Off switch

4. Battery

5. Feet

Assembly

Warning! Before assembly, make sure that

the appliance is switched off and the battery is

removed.

Warning! Always wear protective gloves when

working with your cordless sweeper.

Blow tube assembly (g. A)

The blow tubes (1) must be assembled before use.

u Align the square latches (6) on the side of the blow tubes

(1).

u Push the blow tubes (1) rmly into each other until the

square latches (6) click into place.

Note! The blow tubes can be separated for storage by press-

ing in the square latches (6) on the side of the blow tube and

pulling them apart.

Mounting the blow tube (g. B)

u Align the square latches (6) on the side of the blow tube

(1) with the square latches (7) on the nozzle (8).

u Push the blow tube (1) rmly onto the nozzle (8) until the

square latches (6 & 7) click into place.

Note! The blow tubes can be separated from the nozzle by

pressing in the square latches (7) on the side of the nozzle

and pulling them apart.

Fitting and removing the battery (g. C)

u To t the battery (4), line it up with the receptacle on the

tool. Slide the battery into the receptacle and push until

the battery snaps into place.

u To remove the battery, push the release button (9) while at

the same time pulling the battery out of the receptacle.

Use

Warning! Let the tool work at its own pace. Do not overload.

Charging the battery (g. D)

The battery needs to be charged before rst use and whenev-

er it fails to produce sufcient power on jobs that were easily

done before. The battery may become warm while charging;

this is normal and does not indicate a problem.

Warning! Do not charge the battery at ambient temperatures

below 10 °C or above 40 °C. Recommended charging tem-

perature: approx. 24 °C.

Note: The charger will not charge a battery if the cell

temperature is below approximately 10 °C or above 40 °C.

The battery should be left in the charger and the charger

will begin to charge automatically when the cell tempera-

ture warms up or cools down.

u To charge the battery (4), insert it into the charger (10).

The battery will only t into the charger in one way. Do

not force. Be sure that the battery is fully seated in the

charger.

u Plug in the charger and switch on at the mains.

The charging indicator (11) will blink.

The charge is complete when the charging indicator (11)

switches to continuously on. The charger and the battery can

be left connected indenitely. The LED will switch on as the

charger occasionally tops up the battery charge.

u Charge discharged batteries within 1 week. Battery life will

be greatly diminished if stored in a discharged state.

Leaving the battery in the charger

The charger and battery pack can be left connected with the

LED glowing indenitely. The charger will keep the battery

pack fresh and fully charged.

Switching on and off (g. E)

Warning! Use both hands to grip the product rmly when

switching on.

u To switch the appliance on, slide the on/off switch (3)

forward.

u To switch the appliance off, slide the on/off switch (3)

back.

Maintenance

Your Black & Decker appliance has been designed to operate

over a long period of time with a minimum of maintenance.

Continuous satisfactory operation depends upon proper appli-

ance care and regular cleaning.

u Switch off and unplug the appliance/tool.

u Or switch off and remove the battery from the appliance/

tool if the appliance/tool has a separate battery pack.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Black Decker GWC1800 TYPE H1 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info