Bedienungsanleitung Black Decker GX530 T8 (Seite 5 von 64) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch, Spanisch)

586102

Zoom out

Zoom in

Vorherige Seite

1/64

Nächste Seite

• Using a cloth placed over the blade (23),

grip the blade and, using the spanner

provided (20), tighten the nut (21) in a

clockwise direction.

Switchbox operation (Fig. E)

We strongly recommend that prior to

connecting your mower to the mains, you

understand fully the switchbox operation.

The operation is as follows:

To start your mower

• Grasp the handle (7) with both hands.

• Tilt your mower slightly to one side.

Note: Failure to do this may result in an

unsightly ring being cut in your lawn.

• Remove your left hand from the handle

(7) and depress the lock-off button (15).

• Whilst this button is depressed, grasp

the switchbox lever (14) with your right

hand and squeeze towards the handle (7).

• Your mower will now operate.

• Release the lock-off button (15) and

return your left hand to the handle tube.

Note: If the lock-off button (15) is not

depressed in the order above, your mower

will not operate and the lever (14) will not

engage with the switch. This is a safety

feature!

To stop your mower

• Tilt your mower slightly to one side.

Note: Failure to do this may result in an

unsightly ring being cut in your lawn.

• Release the switchbox lever (14).

• When your mower has stopped rotating,

lower it back onto the lawn.

Handle operation (Fig. F)

The normal operating range of the handle is

shown in Fig. F, as angle F1. This should

enable a comfortable working position to

be achieved.

If you wish to store your mower by hanging it

on the wall (angle F2), proceed as follows:

• Disconnect it from the mains.

• Remove the grassbox.

• Lower the handle to the bottom of its

normal range, then pull the handle

towards you and lower it to the ground.

(Do not drop the handle as it may

damage the switchbox.)

Your mower can now be lifted and stored on

the wall if required.

ENGLISH

Height of cut adjustment (Fig. D & G)

The cut height of your mower is adjusted by

means of blade spacers (22 & 24). The

method for this operation is as follows:

• Ensure your mower is disconnected from

the mains supply.

• Turn your mower onto its side so that the

underside of the cutter deck (1) is

exposed.

• Using a cloth placed over the blade (23),

grip the blade and, using the spanner

provided (20), undo the nut (21) in an

anti-clockwise direction.

• Remove the blade nut, spacers and

blade (21-24) and re-assemble to give

the cut height required. See Fig. G,

showing the 6 cut heights available.

• Once the cut height is selected, re-

assemble the blade, ensuring the cutter

blade (23) is assembled with the cutting

tips downwards as shown in Fig. D.

• Ensure the blade nut (21) is tight.

Note: Your mower is supplied with a cut

height of 11mm (Fig. G).

• Always re-fit 3 spacers and never fit more

or your mower will become unsafe.

Carrying your mower (Fig. H)

Disconnect your mower from the mains.

Remove the grassbox, lower the handle to

the flat “park” position and then, holding one

handle near the pivot block and carry with

the blade pointing away from you.

How to use your mower (Fig. J)

Observe all of the relevant warnings when

using your mower.

We recommend the directional method of

operation to obtain maximum cutting

performance from your mower and to reduce

the risk of the trailing extension lead from

entering the cutting path.

• Place the bulk of the extension cable

on the lawn close to the starting point

(Fig. J, position 1).

• Hold the handle assembly with both

hands.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Black Decker GX530 T8 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info