Bedienungsanleitung Black Decker HPL10RS T1 (Seite 7 von 100) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Schwedisch, Norwegisch, Finnisch)

581141

Zoom out

Zoom in

Vorherige Seite

1/100

Nächste Seite

ENGLISH

(Original instructions)

Assembly

Warning! Before assembly, remove the battery from the tool

and make sure that the saw blade has stopped. Used saw

blades may be hot.

Fitting the saw blade (g. B)

u Hold the tool away from the body

u Rotate the blade clamp collar (8) to the release position.

u Insert the shank of the blade fully into the blade clamp

collar (8).

u Release the blade clamp collar (8) to lock the blade into

position

Note: The blade can be installed with the teeth up to assist in

ush cutting

Removing the saw blade (g. B)

Warning! Burn hazard: Do not touch the blade immediately

after use. Contact with the blade may result in personal injury.

u Rotate the blade clamp collar (8) to the release position.

u Remove blade

Adjusting the handle (g. C)

The tool can be converted into three different positions. To

change positions:

u Slide the pivot release slider (3) to the right and rotate the

handle portion of the tool into any of the three positions

shown.

Warning! To avoid being pinched, keep hands away from the

hinge when changing positions.

Warning! To avoid tool being turned on accidentally, make

sure the lock-off button is engaged.

Lock-off button

The tool is equipped with a switch lock-off feature to prevent

unintentional operation.

u To lock: push the lock-off button (2) to the locked position.

u To un-lock: push the lock-off button (2) to the un-locked

position.

Adjustable shoe (g. D)

The shoe (6) will adjust to limit the depth of cut.

Caution! Make sure the lock-off button (2) is engaged to

prevent switch actuation before making any adjustments or

removing or installing attachments or accessories.

u Remove the allen wrench (9) from the holder.

u Insert the wrench into the allen screw (7).

u With the allen screw loosened, pull the adjustable shoe (6)

out to the desired distance.

u When cutting pipe or similar workpiece, place the shoe

over the object being cut. Adjust the shoe so that it is snug

but still allows for slight movement of the workpiece.

u Tighten allen screw.

Warning! To prevent loss of control, never use tool without

shoe.

Fitting and removing the battery (g. E)

u To t the battery (5), line it up with the receptacle on the

tool. Slide the battery into the receptacle and push until

the battery snaps into place.

u To remove the battery, push the release buttons (13) while

at the same time pulling the battery out of the receptacle.

Use

Warning! Let the tool work at its own pace. Do not overload.

Charging the battery (g. A)

The battery needs to be charged before rst use and whenev-

er it fails to produce sufcient power on jobs that were easily

done before. The battery may become warm while charging;

this is normal and does not indicate a problem.

Warning! Do not charge the battery at ambient temperatures

below 10 °C or above 40 °C. Recommended charging tem-

perature: approx. 24 °C.

Note: The charger will not charge a battery if the cell

temperature is below approximately 10 °C or above 40 °C.

The battery should be left in the charger and the charger

will begin to charge automatically when the cell tempera-

ture warms up or cools down.

u To charge the battery (5), insert it into the charger (11).

The battery will only t into the charger in one way. Do

not force. Be sure that the battery is fully seated in the

charger.

u Plug in the charger and switch on at the mains.

The charging indicator (12) will ash green continuously

(slowly).

The charge is complete when the charging indicator (12)

lights green continuously. The charger and the battery can be

left connected indenitely with the LED illuminated. The LED

will change to ashing green (charging) state as the charger

occasionally tops up the battery charge. The charging indica-

tor (12) will be lit as long as the battery is connected to the

plugged-in charger.

u Charge discharged batteries within 1 week. Battery life will

be greatly diminished if stored in a discharged state.

Leaving the battery in the charger

The charger and battery pack can be left connected with the

LED glowing indenitely. The charger will keep the battery

pack fresh and fully charged.

Charger diagnostics

If the charger detects a weak or damaged battery, the charg-

ing indicator (12) will ash red at a fast rate. Proceed as

follows:

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Black Decker HPL10RS T1 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info