Bedienungsanleitung Black Decker ka 1000 h 9 (Seite 8 von 84) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch, Finnisch)

390172

Zoom out

Zoom in

Vorherige Seite

1/84

Nächste Seite

ENGLISH

Item Description

120gritprolesandingsheet.

For a medium nish for prole sanding.

Assembly

Warning! Before assembly, make sure that the tool is

switched off and unplugged.

Fittingsandingsheets(g.A&B)

u Detach the two additional diamond-shaped tips (10) from

the sanding sheet (11).

u Hold the tool with the sanding base facing upwards.

u Place the sanding sheet (11) onto the sanding base,

making sure that the holes in the sheet line up with the

holes in the base.

The diamond-shaped tip (10) can be reversed and replaced

when worn.

u When the front part of the tip is worn, detach it from the

sheet, reverse it and press it onto the sanding base again.

u When the whole tip is worn, remove it from the sanding

base and t a new tip.

u The polishing foam and pads (12) can be tted the same

way as the sanding sheets.

For optimal dust collection, ensure the correct type of sanding

paper is used.

Tipofthesandingbase(g.C)

When the sanding base tip (5) or tip holder (4) is worn, it can

be reversed or replaced. Spare parts are available from your

Black & Decker dealer.

u Remove the screw (8).

u Reverse or replace the worn part.

u Fit and tighten the screw.

Fingerattachment(g.D)

The nger attachment is used for ne detail sanding.

u Remove the screw (8).

u Remove the diamond-shaped tip holder (4) from the

sanding base.

u Fit the nger attachment (6) onto the sanding base.

u Fit and tighten the screw.

u Fit the appropriate sanding sheet onto the nger

attachment.

Proleattachment(g.E)

The prole attachment is used for contour sanding.

u Remove the screw (8).

u Remove the diamond-shaped tip holder (4) from the

sanding base.

u Fit the prole attachment (7) onto the sanding base.

u Fit and tighten the screw.

Fittingandremovingasandingprole(g.F1&F2)

u Choose the sanding prole most suitable for your

application.

u Place one end of the sanding prole (9) into the recess at

the front end of the prole holder (7).

u Push the other end of the sanding prole until it clicks into

place.

u To remove the sanding prole, push it forward and pull the

rear end out of the prole holder (g. F2).

Fittingasandingsheetontoasandingprole(g.G)

u Align the sanding sheet with the sanding prole (9).

u Press the sanding sheet onto the sanding prole, making

sure that the sanding sheet follows the shape of the prole.

Fittingandremovingthedustcassette(g.H)

u Slide the dust cassette (2) onto the tool and make sure

that it is securely located.

u To remove the dust casette, pull it to the rear and off the

tool.

Use

Warning! Let the tool work at its own pace. Do not overload.

Switching on and off

u To switch the tool on, set the on/off switch (1) to position I.

u To switch the tool off, set the on/off switch to position O.

Emptyingthedustcassette(g.H)

The dust cassette should be emptied every 10 minutes of use.

u While holding the tool, pull the dust cassette (2) to the rear

and off the tool.

u Remove the cassette door (13).

u Shake the door (13) and dust cassette (2) to empty the

contents.

u Ret the door (13) and dust cassette (2) onto the tool.

Accessories

The performance of your tool depends on the accessory used.

Black & Decker and Piranha accessories are engineered to

high quality standards and designed to enhance the

performance of your tool. By using these accessories you will

get the very best from your tool.

Maintenance

Your tool has been designed to operate over a long period of

time with a minimum of maintenance. Continuous satisfactory

operation depends upon proper tool care and regular cleaning.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Black Decker ka 1000 h 9 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info