Bedienungsanleitung Black Decker ka 171 gt (Seite 6 von 56) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch)

389437

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

ENGLISH

! Press the tool with the sanding base (6) down into the

paper punch.

! Take the tool off the paper punch and check whether the

holes in the sanding sheet have been fully pierced.

Fitting and removing the dust cassette (fig. F) KA171,

KA171GT, KA171L only

! Fit the dust cassette (4) over the dust extraction outlet (5).

! To remove the dust cassette (4), pull the dust cassette to

the rear and off the outlet.

Fitting and removing the dustbag (fig. G)

! Fit the dustbag (11) over the dust extraction outlet (5).

! To remove the dustbag, pull the dustbag to the rear and off

the outlet.

Louvre attachment (fig. D) KA171L only

With this attachment you can work in crevices and use the

sanding base on both sides.

! Locate the front of the louvre attachment (9) onto the

sanding base (6).

! Secure it in position with the four screws supplied.

! Place a 1/2 sheet to the underside of the louvre (9) base.

Part of it will fold over the front part of the base.

! To remove the louvre attachment, reverse the procedure.

Use

Warning! Let the tool work at its own pace.

Warning! Do not overload.

Switching on and off (fig. E)

! To switch the tool on, press the part of the on/off switch (1)

marked 'I'.

! To switch the tool off, press the part of the on/off switch (1)

marked '0'.

Emptying the dust cassette (fig. F)

! The dust cassette (4) should be emptied every 10 minutes.

! Pull the dust cassette (4) to the rear and off the tool.

! Remove the cover (3) by twisting it counter-clockwise.

! Hold dust cassette with the filter (10) facing down and

shake the cassette (4) to empty the contents.

! Shake the cover (3) to empty the contents.

! Refit the cover (3) onto the dust cassette (4), twisting it

clockwise until it locks into place.

! Refit the dust cassette (4) onto the tool.

Cleaning the dust cassette filter

Warning! Do not brush or use compressed air or sharp objects

to clean the filter. Do not wash the filter.

! The dust cassette filter (10) is re-usable & should be

cleaned regularly.

! Empty the dust cassette filter (10) as described above.

! Pull the filter (10) off the dust cassette (4). DO NOT TWIST

THE FILTER.

! Shake off the excess dust by tapping the filter (10) into a

dustbin.

! Replace the filter (10).

! Fit the cover (3).

! Fit the dust cassette (4) onto the tool.

Emptying the dustbag

! The dustbag (11) should be emptied every 10 minutes.

! Shake the dustbag to empty the contents

Hints for optimum use (fig. E)

! Do not place your hands over the ventilation slots.

! Do not exert too much pressure on the tool.

! Regularly check the condition of the sanding sheet. Replace

when necessary.

! Always sand with the grain of the wood.

! When sanding new layers of paint before applying another

layer, use extra fine grit.

! On very uneven surfaces, or when removing layers of paint,

start with a coarse grit. On other surfaces, start with a

medium grit. In both cases, gradually change to a fine grit

for a smooth finish.

! Consult your retailer for more information on available

accessories.

Maintenance

! Your Black & Decker tool has been designed to operate

over a long period of time with a minimum of maintenance.

Continuous satisfactory operation depends upon proper

tool care and regular cleaning.

! Before performing any maintenance, switch off and unplug

the tool.

! Regularly clean the ventilation slots in your tool using a soft

dry brush or dry cloth.

! Regularly clean the motor housing using a clean damp

cloth. Do not use any abrasive or solvent-based cleaner.

Protecting the environment

Should you find one day that your tool needs

replacement, or if it is of no further use to you,

think of the protection of the environment. Black &

Decker repair agents will accept old Black &

Decker tools and ensure that they are disposed of

in an environmentally safe way.

Separate collection of used products and

packaging allows materials to be recycled and

used again. Re-use of recycled materials helps

prevent environmental pollution and reduces the

demand for raw materials.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Black Decker ka 171 gt Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info