Bedienungsanleitung Black Decker ka 225 ek (Seite 4 von 8) (Englisch)

390105

Zoom out

Zoom in

Vorherige Seite

1/8

Nächste Seite

Additional safety instructions for sanders

◆ Always wear a dust mask whenever sanding.

◆ Thoroughly remove all dust after sanding.

◆ Before using the tool on wooden workpieces, make sure

to fit the dustbag.

◆ Before using the tool on metal workpieces, make sure to

remove the dustbag.

◆ Never use the tool without a sanding sheet.

◆ Never use the tool without a sanding base.

Sanding lead-based paint or MDF

Sanding of lead-based paint is not recommended due to the

difficulty of controlling the contaminated dust. The greatest

danger of lead poisoning is to children and pregnant women.

Any pre-1960 building may in the past have been painted with

paint containing lead. This paint may be covered with additional

layers of paint. Before starting work, it is important to

determine whether the paint to be sanded contains lead.

This can be done using a test kit or by a professional decorator.

Personal protection

◆ Do not let children or pregnant women enter the work area.

◆ Wear a dust mask specifically designed for protection

against lead paint dust and fumes and ensure that persons

within or entering the work area are also protected.

◆ Do not eat, drink or smoke in the work area. Do not store

any food or drink in the work area.

◆ Wash yourself very carefully before eating, drinking or

smoking.

Environment

◆ Remove the paint in such a way that the amount of dust is

minimised.

◆ Seal the work area with plastic sheeting.

◆ Minimise the amount of dust outside the work area.

Cleaning

◆ Thoroughly vacuum and clean all surfaces in the work

area every day.

◆ Regularly change the dustbag and filters of the vacuum

cleaner.

◆ Thoroughly wash any foreign objects exposed to dust

before using them again.

Additional safety instructions for Australia and New

Zealand

◆ This appliance is not intended for use by young or infirm

persons without supervision. Children must be supervised

to ensure they do not play with the appliance.

◆ If the supply cord is damaged, it must be replaced by the

manufacturer or an authorised Black & Decker Service

Centre in order to avoid a hazard.

Features

This tool includes some or all of the following features.

◆ On/off switch (1)

◆ Variable speed control (2)

◆ Round base (3)

◆ Pointed base (4)

◆ Dustbag (5)

◆ Louvre attachment (fig. J)

Assembly

Warning! Make sure that the tool is switched off and unplugged.

Round base

With this sanding base, you can use the tool as a random orbit

sander (fig. H).

Fitting and removing the sanding base (fig. A)

◆ Place the sanding base (3) onto the spindle (6).

◆ Place the washer (7) onto the spindle.

◆ Insert the screw (8) into the hole in the spindle and

tighten the screw using the Allen key (9) supplied.

◆ To remove the sanding base, remove the screw and washer.

Fitting sanding sheets (fig. B)

◆ Hold the tool with the sanding base (3) facing upwards.

◆ Press the sanding sheet (10) onto the sanding base.

The holes in the sheet do not need to line up with the

holes in the base.

Pointed base

With this sanding base, you can use the tool as a detail

sander or an orbital sander.

Fitting and removing the sanding base (fig. C & D)

◆ Place the sanding base (4) onto the spindle (6). For detail

sanding, the pointed end should face forward as in fig. C.

For sanding large areas, the pointed end should face to

the back as in fig. D.

◆ Make sure that the legs of the base locate into the tool.

◆ Place the washer (7) onto the spindle.

◆ Insert the screw (8) into the hole in the spindle and

tighten the screw using the Allen key (9) supplied.

◆ To remove the sanding base, remove the screw and

washer.

Fitting sanding sheets (fig. E)

◆ Detach the two diamond-shaped tips (11) from the

sanding sheet (12).

◆ Hold the tool with the sanding base facing upwards.

◆ Place the sanding sheet (12) onto the sanding base,

making sure that the holes in the sheet line up with the

holes in the base.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Black Decker ka 225 ek Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info