Bedienungsanleitung Black Decker ka 225 (Seite 5 von 8) (Englisch)

389359

Zoom out

Zoom in

Vorherige Seite

1/8

Nächste Seite

The diamond-shaped tip (13) can be reversed and replaced

when worn.

◆ When the front part of the tip is worn, detach it from the

sheet, reverse it and press it onto the sanding base again.

◆ When the whole tip is worn, remove it from the sanding

base and fit a new tip.

Tip of the sanding base (fig. F)

When the sanding base tip (14) or tip holder (15) is worn,

it can be reversed or replaced. Spare parts are available from

your Black & Decker dealer.

◆ Remove the screw (16).

◆ Reverse or replace the worn part.

◆ Fit and tighten the screw.

Louvre attachment (fig. J)

With this attachment you can work in crevices and use

the sanding base on both sides.

◆ Remove the tip of the sanding base and the tip holder (fig. F).

◆ Fit the louvre base (22) over the tip of the pointed base.

◆ Secure the louvre base with the screw (21).

◆ Stick the main abrasive sheet to the underside of the

louvre base. Part of it will stick to the front part of the

pointed base.

For sanding down louvre slats on both sides, abrasive paper

can be fitted to the upperside of the attachment.

◆ Remove the backing paper (20) from the velcro fastener (19).

◆ Stick the velcro fastener to the top surface of the louvre

attachment.

◆ Fit the sanding piece (18) to the velcro fastener.

Use

Warning! Do not cover the ventilation slots when using the

tool. Hold the tool as shown in fig. I. Make sure that the

sanding base is flat on the workpiece.

Switching on and off

◆ If the tool has a variable speed control knob (2), set it to

the required speed range. As a general rule, use a low

speed for polishing and for sanding plastics. Use a high

speed for wood and metal.

◆ To switch the tool on, press the part of the on/off switch (1)

marked ‘I’.

◆ To switch the tool off, press the part of the on/off switch (1)

marked ‘0’.

Automatic brake system (ABS)

This tool has an automatic brake system. When the tool is not

on the work surface, this feature keeps the speed of the round

base below the speed of the motor. When the tool is switched

off, the base will stop very quickly.

Connecting a vacuum cleaner

In order to connect a vacuum cleaner to the tool, you need a

special adaptor, which is available as an accessory.

Emptying the dustbag (fig. G)

The dustbag should be emptied every 10 minutes of use.

◆ Hold the tool with the dustbag (5) pointing down.

◆ Squeeze the buttons (17) to release the dustbag.

◆ Refit the dustbag, letting it click into place.

Do not wash the dustbag.

Accessories

The performance of your tool depends on the accessory used.

Black & Decker and Piranha accessories are engineered to

high quality standards and designed to enhance the

performance of your tool. By using these accessories you will

get the very best from your tool.

Maintenance

Your tool has been designed to operate over a long period of

time with a minimum of maintenance. Continuous satisfactory

operation depends upon proper tool care and regular cleaning.

Mains plug replacement (U.K. & Ireland only)

If a new mains plug needs to be fitted:

◆ Safely dispose of the old plug.

◆ Connect the brown lead to the live terminal in the new plug.

◆ Connect the blue lead to the neutral terminal.

Warning! No connection is to be made to the earth terminal.

Follow the fitting instructions supplied with good quality

plugs. Recommended fuse: 5 A.

Protecting the environment

Black & Decker provides a facility for recycling

Black & Decker products once they have reached the

end of their working life. This service is provided

free of charge. To take advantage of this service

please return your product to any authorised repair

agent who will collect them on our behalf.

You can check the location of your nearest authorised repair

agent by contacting your local Black & Decker office at the

address indicated in this manual. Alternatively, a list of

authorised Black & Decker repair agents and full details of our

after-sales service and contacts are available on the Internet

at: www.2helpU.com.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Black Decker ka 225 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info