Bedienungsanleitung Black Decker ka 226 3in1 (Seite 8 von 74) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Spanisch, Schwedisch, Norwegisch, Finnisch)

390064

Zoom out

Zoom in

Vorherige Seite

1/74

Nächste Seite

ENGLISH

5. Service

a. Have your power tool serviced by a qualified repair

person using only identical replacement parts. This

will ensure that the safety of the power tool is maintained.

Additional safety instructions for sanders

X Always wear a dust mask whenever sanding.

X Thoroughly remove all dust after sanding.

X Take special care when sanding paint which is possibly

lead based or when sanding some woods and metal which

may produce toxic dust:

- Wear a dust mask specifically designed for protection

against lead paint dust and fumes and ensure that

persons within or entering the work area are also

protected.

- Do not let children or pregnant women enter the work

area.

- Do not eat, drink or smoke in the work area.

- Dispose of dust particles and any other debris safely.

X Before using the tool on wooden workpieces, make sure to

fit the dust cassette.

X Before using the tool on metal workpieces, make sure to

remove the dust cassette.

X Never use the tool without a sanding sheet.

X Never use the tool without a sanding base.

X This appliance is not intended for use by young or infirm

persons without supervision. Children must be supervised

to ensure they do not play with the appliance.

X If the supply cord is damaged, it must be replaced by the

manufacturer or an authorised Black & Decker Service

Centre in order to avoid a hazard.

Electrical safety

This tool is double insulated; therefore no earth wire

is required. Always check that the power supply

corresponds to the voltage on the rating plate.

Features

1. On/off switch

2. Dust cassette

3. Random orbit sanding base

4. Large detail sanding base

The following items may not be supplied with your model,

refer to packaging.

5. Small detail sanding base

6. Detail finger attachment

7. Profile sanding base

8. Sanding profiles (KA250 and KA260 only)

9. Louvre attachment

10. Gel comfort grip

Note: Due to continuous development, the appearance of

some of the items may vary.

Assembly

Warning! Before assembly, make sure that the tool is switched

off and unplugged.

Warning! After a period of use the base fixing screw may be to

hot to touch, use the tool provided.

Random orbit sanding base

With this sanding base, you can use the tool as a random

orbit sander.

Fitting and removing the sanding base (fig. B)

X Place the sanding base (3) onto the spindle (9).

X Place the washer (10) onto the spindle.

X Insert the Allen screw (11) into the screw hole in the

spindle.

X Tighten the Allen screw using the Allen key (12) supplied.

X To remove the sanding base, remove the Allen screw (11)

and washer (10).

Fitting sanding sheets (fig. C)

X Hold the tool with the sanding base (3) facing upwards.

X Place the sanding sheet (13) onto the sanding base (3). The

holes in the sheet do not need to line up with the holes in

the base.

Fitting the polishing foam pad (fig. D)

The polishing foam pad is used to apply the polishing agent

or wax to the workpiece.

X Hold the tool with the sanding base (3) facing upwards.

X Place the pad (21) onto the sanding base (3).

Fitting the polishing bonnet (fig. E)

The polishing bonnet is used to polish the workpiece.

X Hold the tool with the sanding base (3) facing upwards.

X Place the bonnet (22) onto the sanding base (3).

Small or large detail sanding base

With this sanding base, you can use the tool as a detail

sander or an orbital sander.

Fitting and removing the sanding base (fig. F)

X Place the sanding base onto the spindle (9). Make sure that

the legs locate in the base.

X Place the washer (10) onto the spindle.

X Insert the Allen screw (11) into the screw hole in the

spindle.

X Tighten the Allen screw using the Allen key (12) supplied.

X To remove the sanding base, remove the Allen screw (11)

and washer (10).

Fitting sanding sheets (fig. G)

X Detach the two diamond-shaped sanding tips (15) from the

sanding sheet (14).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Black Decker ka 226 3in1 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info