Bedienungsanleitung Black Decker ka 250 k (Seite 10 von 74) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Spanisch, Schwedisch, Norwegisch, Finnisch)

389426

Zoom out

Zoom in

Vorherige Seite

1/74

Nächste Seite

ENGLISH

Hints for optimum use

X Always hold the tool with both hands (fig. S).

X Do not place your hands over the ventilation slots.

X Do not exert too much pressure on the tool.

X Regularly check the condition of the sanding sheet. Replace

when necessary.

X Always sand with the grain of the wood.

X When sanding new layers of paint before applying another

layer, use extra fine grit.

X On very uneven surfaces, or when removing layers of paint,

start with a coarse grit. On other surfaces, start with a

medium grit. In both cases, gradually change to a fine grit

for a smooth finish.

X Consult your retailer for more information on available

accessories.

MAINTENANCE

Your Black & Decker tool has been designed to operate over

a long period of time with a minimum of maintenance.

Continuous satisfactory operation depends upon proper tool

care and regular cleaning.

Before performing any maintenance, switch off and unplug

the tool.

X Regularly clean the ventilation slots in your tool using a soft

dry brush or dry cloth.

X Regularly clean the motor housing using a clean damp

cloth. Do not use any abrasive or solvent-based cleaner.

Protecting the environment

Should you find one day that your tool needs

replacement, or if it is of no further use to you, think

of the protection of the environment. Black &

Decker repair agents will accept old Black & Decker

tools and ensure that they are disposed of in an

environmentally safe way.

Separate collection of used products and packaging

allows materials to be recycled and used again. Re-

use of recycled materials helps prevent

environmental pollution and reduces the demand

for raw materials.

Local regulations may provide for separate collection of

electrical products from the household, at municipal waste

sites or by the retailer when you purchase a new product.

Black & Decker provides a facility for the collection and

recycling of Black & Decker products once they have reached

the end of their working life. To take advantage of this

service please return your product to any authorised repair

agent who will collect them on our behalf.

You can check the location of your nearest authorised repair

agent by contacting your local Black & Decker office at the

address indicated in this manual. Alternatively, a list of

authorised Black & Decker repair agents and full details of

our after-sales service and contacts are available on the

Internet at: www.2helpU.com.

Technical data

EC declaration of conformity

KA226, KA250, KA260GT

Black & Decker declares that these products conform to:

98/37/EC, 89/336/EEC, EN 60745, EN 55014, EN61000

(sound pressure) 76 dB(A),

(acoustic power) 87 dB(A),

hand/arm weighted vibration <12.1 m/s

Kpa (sound pressure uncertainty 3 dB(A),

Kwa (sound power uncertainty 3 dB(A),

Kevin Hewitt

Director of Consumer Engineering

Spennymoor, County Durham DL16 6JG,

United Kingdom

7-7-2005

KA226 KA250 KA260GT

Voltage Vac 230 230 230

Power input W 155 170 170

Oscillations (no load) min-1 26,000 26,000 26,000

Orbits (no load) min-1 13,000 13,000 13,000

Weight kg 1.26 1.26 1.26

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Black Decker ka 250 k Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info