Bedienungsanleitung Black Decker ka 280 k (Seite 9 von 120) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Spanisch, Schwedisch, Norwegisch, Finnisch)

390246

Zoom out

Zoom in

Vorherige Seite

1/120

Nächste Seite

ENGLISH

Louvre attachment (fig. M) (KA280L only)

With the louvre attachment you can work in crevices.

 Remove the screw (17).

 Remove the diamond-shaped tip holder (16) from the

sanding base.

 Fit the louvre attachment (22) onto the sanding base.

 Fit and tighten the screw.

 Fit the appropriate sanding sheet onto the louvre

attachment.

The additional piece of hook and loop fastener (23) can be

attached to the top surface of the louvre attachment to allow

for sanding using both sides.

 Remove the backing paper from the hook and loop

fastener (23).

 Stick the hook and loop fastener to the top surface of the

louvre attachment (22).

 Fit the sanding piece to the hook and loop fastener.

Residual risks

Additional residual risks may arise when using the tool which

may not be included in the enclosed safety warnings. These

risks can arise from misuse, prolonged use etc.

Even with the application of the relevant safety regulations

and the implementation of safety devices, certain residual

risks cannot be avoided. These include:

 Injuries caused by touching any rotating/moving parts.

 Injuries caused when changing any parts, blades or

accessories.

 Injuries caused by prolonged use of a tool. When using

any tool for prolonged periods make sure you take

regular breaks.

 Impairment of hearing.

 Health hazards caused by breathing dust developed

when using your tool (example:- working with wood,

especially oak, beech and MDF).

Use

Warning! Let the tool work at its own pace. Do not overload.

Warning! Do not cover the ventilation slots when using the

tool. Hold the tool as shown in fig. R. Make sure that the

sanding base is flat on the workpiece.

 Store the tool with a base in place.

 Keep hands away from the spindle area on the tool.

 Do not turn the Autoselect

dial while the unit is running.

 Do not rest fingers on the base during use.

Switching on and off (fig. N)

 To switch the tool on, set the on/off switch (1) to

position I.

 To switch the tool off, set the on/off switch (1) to

position O.

Autoselect

Technology (fig.O)

This sander is fitted with an Autoselect

dial (2) which shows

various sanding applications. They are used to select the

correct operating mode for your particular sanding operation.

 Using the Autoselect

dial (2), choose from one of the

following applications:

- Detail sanding (A).

- Corner sanding (B).

- Flush sanding (C).

- Random orbit sanding (D).

The correct base to be used and the recommended sanding

speed will be displayed in the base/speed setting

window (3).

Note: You can override the selected speed at any time by

moving the Autoselect

dial to positions (A) and (B), slower

speeds, or positions (C) and (D), higher speeds.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Black Decker ka 280 k Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info