Bedienungsanleitung Black Decker ka 89 ek (Seite 7 von 72) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch)

390219

Zoom out

Zoom in

Vorherige Seite

1/72

Nächste Seite

ENGLISH

Labels on tool

The following pictograms are shown on the tool:

Warning! To reduce the risk of injury, the user must

read the instruction manual.

Electrical safety

This tool is double insulated; therefore no earth wire

is required. Always check that the power supply

corresponds to the voltage on the rating plate.

u If the supply cord is damaged, it must be replaced by the

manufacturer or an authorised Black & Decker Service

Centre in order to avoid a hazard.

Features

1. On/off switch

2. Lock-on button

3. Variable speed control knob

4. Adjustable handle

5. Tension lever

6. Retractable hood

7. Centring knob

8. Dust extraction outlet

Assembly

Warning! Before assembly, make sure that the tool is

switched off and unplugged.

Fittingasandingbelt(g.A)

Warning! Never use the tool without a sanding belt.

u Pull the tension lever (5) outward to release the tension on

the sanding belt (9).

u Remove the old sanding belt.

u Place a new sanding belt over the rollers. Ensure that the

arrow on the sanding belt points in the same direction as

the arrow on the tool.

u Push the tension lever (5) inward to tension the sanding belt.

Adjustingthesandingbelttracking(g.B)

To ensure a correct tracking, the sanding belt must be centred

over the rollers.

u Switch on the tool while holding it upside down.

u Turn the centring knob (7) as required until the tracking of

the belt is centred over the rollers.

Adjustingthehandle(g.C)

The handle is adjustable to 3 positions.

u Unlock the handle (4) by pulling the locking handle (10)

outward.

u Adjust the handle in the desired position.

u Lock the handle by pushing the locking handle inward.

Retractingthehood(g.D)

The hood can be retracted for sanding in conned spaces.

Warning! The hood can only be retracted when the adjustable

handle is in the up position.

u Adjust the handle (4) in the straight-up position.

u Lift the hood (6) up.

u To close the hood, pull the tab (11) sideways rst.

Fittingandremovingthedustcassette(g.E)

u Slide the dust cassette (12) over the dust extraction outlet (8).

u To remove the dust cassette, slide it off the outlet.

Connectingavacuumcleaner(g.F)

u Slide the adaptor (13) over the dust extraction outlet (8).

u Connect the hose of the vacuum cleaner to the adaptor.

Use

Warning! Let the tool work at its own pace. Do not overload.

Variable speed control

The variable speed control allows you to adapt the speed of

the tool to the workpiece material.

u Set the control knob (3) to the desired setting. Use a high

speed for wood, medium speed for veneer and synthetics

and low speed for acrylic glass, non-ferrous metals and for

removing paints.

Switching on and off

u To switch the tool on, press the on/off switch (1).

u For continuous operation, press the lock-on button (2) and

release the on/off switch.

u To switch the tool off, release the on/off switch. To switch

the tool off when in continuous operation, press the on/off

switch once more and release it.

Emptyingthedustcassette(g.E&G)

The dust cassette should be emptied every 10 minutes of use.

u Remove the dust cassette (12) to the rear and off the tool.

u Remove the cover (14) by twisting it clockwise.

u Hold dust cassette with the lter (15) facing down and

shake the cassette to empty the contents. Shake the

cover to empty the contents.

u Ret the cover (14) onto the dust cassette, twisting it

counterclockwise until it locks into place.

u Ret the dust cassette onto the tool.

Cleaningthedustcassettelter

The dust cassette lter is re-usable and should be cleaned

regularly.

u Empty the dust cassette (12) as described above.

u Pull the lter (15) off the dust cassette.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Black Decker ka 89 ek Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info