Bedienungsanleitung Black Decker KA280 (Seite 8 von 120) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Spanisch, Schwedisch, Norwegisch, Finnisch)

501662

Zoom out

Zoom in

Vorherige Seite

1/120

Nächste Seite

ENGLISH

Features

1. On/off switch

2. Autoselect

dial

3. Base / speed setting indicator

4. Base release button

5. Random orbital sanding base

6. Large detail sanding base

7. Sanding base tip

8. Detail finger attachment

9. Dust canister

Assembly

Warning! Before assembly, make sure that the tool is

switched off and unplugged.

Removing sanding bases (fig. A)

 To remove the sanding base, press the release

button (4) and pull the base (6) from the tool.

Attaching the random orbit sanding base (fig. B)

 Hold the tool and the sanding base (5) facing upwards

as shown in fig. B.

 Align the dust openings (10) in the sanding base with

the dust openings (11) in the tool base.

 Press in on the sanding base until you hear it click into

place.

Fitting sanding sheets (fig. C)

 Hold the tool with the sanding base (5) facing upwards.

 Place the sanding sheet (12) onto the sanding base (5)

making sure that the holes in the sheet line up with the

holes in the base.

Large detail sanding base

With this sanding base, you can use the tool as a detail

sander or a flush sander.

Attaching the large detail sanding base (fig. D & E)

For detail sanding, the pointed end should face forward

(fig. D).

For sanding large areas, the pointed end should face to the

rear (fig. E).

 Attach the sanding base as described above under

"Attaching the random orbit sanding base".

 Press in on the sanding base until you hear it click into

place.

Fitting sanding sheets (fig. F)

 Detach the two diamond-shaped tips (13) from the

sanding sheet (14).

 Hold the tool with the sanding base facing upwards.

 Place the sanding sheet (14) onto the sanding base,

making sure that the holes in the sheet line up with the

holes in the base.

The diamond-shaped tip (15) can be reversed and replaced

when worn.

 When the front part of the tip is worn, detach it from the

sheet, reverse it and press it onto the sanding base

again.

 When the whole tip is worn, remove it from the sanding

base and fit a new diamond shaped tip (13).

Tip of the sanding base (fig. G)

When the sanding base tip (7) is worn, it can be reversed

or replaced. When the diamond shaped tip holder (16) is

worn, it can be replaced. Spare parts are available from your

Black & Decker dealer.

 Remove the screw (17).

 Reverse or replace the worn part.

 Fit and tighten the screw (17).

Finger attachment (fig. H)

The finger attachment is used for fine detail sanding.

 Remove the screw (17).

 Remove the diamond-shaped tip holder (16) from the

sanding base.

 Fit the finger attachment (8) onto the sanding base (6).

 Fit and tighten the screw (17).

 Fit the appropriate sanding sheet (18) onto the finger

attachment.

Profile attachment

The profile attachment is used for contour sanding.

Fitting the profile attachment (fig. I)

 Remove the screw (17).

 Remove the diamond-shaped tip holder (16) from the

sanding base.

 Fit the profile attachment (19) onto the sanding base.

 Fit and tighten the screw (17).

Fitting and removing a sanding profile (fig. J & K)

 Choose the sanding profile most suitable for your

application.

 Place one end of the sanding profile (20) into the recess

at the front end of the profile attachment (19).

 Push the other end of the sanding profile until it clicks

into place.

 To remove the sanding profile (20), push it forward and

pull the rear end out of the profile attachment (19).

Fitting a sanding sheet onto a sanding profile (fig. L)

 Align the sanding sheet (21) with the sanding

profile (20).

 Press the sanding sheet onto the sanding profile,

making sure that the sanding sheet follows the shape

of the profile.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Black Decker KA280 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info