Bedienungsanleitung Black Decker ka300 (Seite 6 von 72) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch, Finnisch)

390068

Zoom out

Zoom in

Vorherige Seite

1/72

Nächste Seite

ENGLISH

Electrical safety

 If the supply cord is damaged, it must be replaced by the

manufacturer or an authorised Black & Decker Service

Centre in order to avoid a hazard.

Using an extension cable

 Always use an approved extension cable suitable for

the power input of this tool (see technical data). Before

use, inspect the extension cable for signs of damage,

wear and ageing. Replace the extension cable if

damaged or defective. When using a cable reel, always

unwind the cable completely. Use of an extension cable

not suitable for the power input of the tool or which is

damaged or defective may result in a risk of fire and

electric shock.

Features

1. On/off switch

2. Dust extraction outlet

3. Paper clamp lever

4. Sanding base

Assembly

Warning! Before assembly, make sure that the tool is

switched off and unplugged.

Fitting sanding sheets (fig. A)

Warning! Never use the tool without a sanding sheet or

accessory in place.

Fitting regular sanding sheets (fig. A)

Warning! Make sure that the tool is switched off and

unplugged.

 Soften the sanding sheet by rubbing its non-abrasive

side over the edge of a worktop.

 Press the paper clamp levers (3) upwards to release

them from the retaining grooves and open the paper

clamps (3) by pressing them down.

 Place the sheet onto the sanding base (4).

 Insert the edge of the sanding sheet into the front paper

clamp (3) as shown.

 Press the front paper clamp lever (3) downwards and

locate it in the retaining groove.

 While keeping a slight tension on the sheet, insert the

rear edge of the sheet into the rear paper clamp (3).

 Press the rear paper clamp lever (3) downwards and

locate it in the retaining groove.

Connecting a vacuum cleaner (fig. C)

 Insert the adaptor (5) into the dust extraction outlet (2).

 Connect the hose (6) of the vacuum cleaner to the

adaptor (5).

Residual risks

Additional residual risks may arise when using the tool which

may not be included in the enclosed safety warnings. These

risks can arise from misuse, prolonged use etc.

Even with the application of the relevant safety regulations

and the implementation of safety devices, certain residual

risks cannot be avoided. These include:

 Injuries caused by touching any rotating/moving parts.

 Injuries caused when changing any parts, blades or

accessories.

 Injuries caused by prolonged use of a tool. When using

any tool for prolonged periods make sure you take

regular breaks.

 Impairment of hearing.

 Health hazards caused by breathing dust developed

when using your tool (example:- working with wood,

especially oak, beech and MDF).

Use

Warning! Let the tool work at its own pace. Do not overload.

Switching on and off (fig. B)

 To switch the tool on, press the part of the on/off switch

(1) marked 'I'.

 To switch the tool off, press the part of the on/off switch

(1) marked '0'.

Hints for optimum use

 Do not place your hands over the ventilation slots.

 Always hold the tool with both hands (fig. D).

 Do not exert too much pressure on the tool.

 Regularly check the condition of the sanding sheet.

Replace when necessary.

 Always sand with the grain of the wood (fig. D).

 When sanding new layers of paint before applying

another layer, use extra fine grit.

 On very uneven surfaces, or when removing layers of

paint, start with a coarse grit. On other surfaces, start

with a medium grit. In both cases, gradually change to a

fine grit for a smooth finish.

 Consult your retailer for more information on available

accessories.

Maintenance

 Your Black & Decker tool has been designed to operate

over a long period of time with a minimum of

maintenance. Continuous satisfactory operation

depends upon proper tool care and regular cleaning.

This tool is double insulated; therefore no earth

wire is required. Always check that the power

supply corresponds to the voltage on the rating

plate.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Black Decker ka300 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info