Bedienungsanleitung Black Decker KA85 T1 (Seite 4 von 12) (Englisch)

578176

Zoom out

Zoom in

Vorherige Seite

1/12

Nächste Seite

g. Use the power tool, accessories and tool bits etc.,

in accordance with these instructions and in the

manner intended for the particular type of power

tool, taking into account the working conditions

and the work to be performed. Use of the power tool

for operations different from those intended could result

in a hazardous situation.

5. Service

a. Have your power tool serviced by a qualified repair

person using only identical replacement parts. This

will ensure that the safety of the power tool is maintained.

Additional safety instructions for sanders

◆ Warning! Contact with or inhalation of dusts arising

from sanding applications may endanger the health of the

operator and possible bystanders. Wear a dust mask

specifically designed for protection against dust and

fumes and ensure that persons within or entering the

work area are also protected.

◆ Thoroughly remove all dust after sanding.

◆ Take special care when sanding paint which is possibly

lead based or when sanding some woods and metal

which may produce toxic dust:

- Do not let children or pregnant women enter the work

area.

- Do not eat, drink or smoke in the work area.

- Dispose of dust particles and any other debris safely.

Electrical safety

This tool is double insulated; therefore no earth wire

is required. Always check that the power supply

corresponds to the voltage on the rating plate.

Additional safety instructions for Australia and

New Zealand

◆ This appliance is not intended for use by young or infirm

persons without supervision. Children must be supervised

to ensure they do not play with the appliance.

◆ If the supply cord is damaged, it must be replaced by the

manufacturer or an authorised Black & Decker Service

Centre in order to avoid a hazard.

Features

1. On/off switch

2. Lock-on button

3. Variable speed control knob (KA85E)

4. Tension lever

5. Dust extraction outlet

Assembly

Warning! Before assembly, make sure that the tool is

switched off and unplugged.

Fitting a sanding belt (fig. A)

Warning! Never use the tool without a sanding belt.

◆ Pull the tension lever (4) outward to release the tension

on the sanding belt (6).

◆ Remove the old sanding belt.

◆ Place a new sanding belt over the rollers. Ensure that the

arrow on the sanding belt points in the same direction as

the arrow on the tool.

◆ To ensure a correct tracking, the sanding belt must be

centred over the rollers.

◆ Push the tension lever (4) inward to tension the sanding

belt.

Fitting and removing the dustbag (fig. B)

◆ Slide the dustbag (7) over the dust extraction outlet (5).

◆ To remove the dustbag, slide it off the outlet.

Use

Warning! Let the tool work at its own pace. Do not overload.

KA85E - Variable speed control (fig. C)

The variable speed control allows you to adapt the speed of

the tool to the workpiece material.

◆ Set the control knob (3) to the desired setting. Use a high

speed for wood, medium speed for veneer and synthetics

and low speed for acrylic glass, non-ferrous metals and

for removing paints.

Switching on and off

◆ To switch the tool on, press the on/off switch (1).

◆ For continuous operation, press the lock-on button (2) and

release the on/off switch.

◆ To switch the tool off, release the on/off switch.

To switch the tool off when in continuous operation,

press the on/off switch once more and release it.

Emptying the dustbag

The dustbag should be emptied every 10 minutes.

◆ Unzip the bag and empty it before continuing.

Hints for optimum use

◆ Always hold the tool with both hands.

◆ Do not exert too much pressure on the tool.

◆ Regularly check the condition of the sanding belt.

Replace when necessary.

◆ Always sand with the grain of the wood.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Black Decker KA85 T1 Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Black Decker KA85 T1

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info