Bedienungsanleitung Black Decker KA900E T1 (Seite 7 von 16) (Englisch)

578033

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

f. Keep cutting tools sharp and clean. Properly maintained

cutting tools with sharp cutting edges are less likely to bind

and are easier to control.

g. Use the power tool, accessories and tool bits etc. in

accordance with these instructions, taking into account

the working conditions and the work to be performed.

Use of the power tool for operations different from those

intended could result in a hazardous situation.

5. Service

a. Have your power tool serviced by a qualified repair

person using only identical replacement parts. This will

make sure that the safety of the power tool is maintained.

Additional power tool safety warnings

 Hold the power tool by insulated gripping surfaces,

because the sanding belt / sanding base may

contact its own cord. Cutting a "live" wire may make

exposed metal parts of the power tool "live" could give

the operator an electric shock.

 Use clamps or another practical way to secure and

support the workpiece to a stable platform. Holding

the work by hand or against your body leaves it unstable

and may lead to loss of control.

 Warning! Contact with or inhalation of dust arising from

sanding applications may endanger the health of the

operator and possible bystanders. Wear a dust mask

specifically designed for protection against dust and

fumes and ensure that persons within or entering the

work area are also protected.

 Thoroughly remove all dust after sanding.

 Take special care when sanding paint which is possibly

lead based or when sanding some woods and metal

which may produce toxic dust:

- Do not let children or pregnant women enter the

work area.

- Do not eat, drink or smoke in the work area.

- Dispose of dust particles and any other debris safely.

 The intended use is described in this instruction manual.

The use of any accessory or attachment or performance

of any operation with this tool other than those

recommended in this instruction manual may present

a risk of personal injury and/or damage to property.

Safety of others

 This appliance is not intended for use by persons

(including children) with reduced physical, sensory or

mental capabilities, or lack of experience and

knowledge, unless they have been given supervision or

instruction concerning the use of the appliance by a

person responsible for the their safety.

 Children should be supervised to ensure that they do

not play with the appliance.

Vibration

The declared vibration emission values stated in the

technical data and the declaration of conformity have been

measured in accordance with a standard test method

provided by EN 60745 and may be used for comparing one

tool with another. The declared vibration emission value may

also be used in a preliminary assessment of exposure.

Warning! The vibration emission value during actual use of the

power tool can differ from the declared value depending on the

ways in which the tool is used. The vibration level may increase

above the level stated.

When assessing vibration exposure to determine safety

measures required by 2002/44/EC to protect persons

regularly using power tools in employment, an estimation of

vibration exposure should consider, the actual conditions of

use and the way the tool is used, including taking account of

all parts of the operating cycle such as the times when the

tool is switched off and when it is running idle in addition to

the trigger time.

Labels on tools

The following symbols are marked on your appliance:

Electrical safety

This tool is double insulated; therefore no earth

wire is required. Always check that the power

supply corresponds to the voltage on the rating

plate.

Warning! Additional safety warnings for sanders.

Warning! To reduce the risk of injury, the user must

read the instruction manual.

Always wear gloves when working with metal

workpieces.

Wear safety glasses or goggles when using the tool.

Wear ear protection when using this tool.

Fit the dust cassette before using the tool

on wooden workpieces.

Remove the dust cassette and fit the

deflector before using the tool on

workpieces containing metal.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Black Decker KA900E T1 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Black Decker KA900E T1

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info