Bedienungsanleitung Black Decker KA902E T1 (Seite 9 von 16) (Englisch)

578034

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

Fitting and removing the deector (g. D & E)

Warning! The deector must be used when sanding metal

workpieces.

u Fit the deector (11) over the dust extraction outlet.

u Slide the deector onto the tool and make sure that it is

securely located.

u To remove the deector, pull it to the rear and off the outlet.

Use

Warning! Let the tool work at its own pace. Do not overload.

Variable speed control (g. G)

The variable speed control allows you to adapt the speed of

the tool to the workpiece material.

u Set the control knob (2) to the desired setting. Use a high

speed for wood, medium speed for veneer and synthetics

and low speed for acrylic glass, non-ferrous metals and for

removing paints.

Switching on and off (g. G)

u To switch the tool on, press the on/off switch (1).

u For continuous operation, press the lock-on button (2) and

release the on/off switch (1).

u To switch the tool off, release the on/off switch (1).

u To switch the tool off when in continuous operation, press

the on/off switch (1) once more and release it.

Emptying the dust cassette (g. F)

The dust cassette (10) should be emptied every 10 minutes of

use.

u Pull the dust cassette (10) to the rear and off the tool.

u Remove the cover (17) by twisting it counter-clockwise.

u Hold dust cassette (10) with the lter (18) facing down and

shake the cassette (10) to empty the contents.

u Shake the cover (17) to empty the contents.

u Ret the cover (17) onto the dust cassette (10), twisting it

clockwise until it locks into place.

u Ret the dust cassette (10) onto the tool.

Cleaning the dust cassette lter (g. F)

Warning! Do not brush or use compressed air or sharp

objects to clean the lter. Do not wash the lter.

u The dust cassette lter (18) is re-usable and should be

cleaned regularly.

u Empty the dust cassette (10) as described above.

u Pull the lter (18) off the dust cassette (14).

u Shake off the excess dust by tapping the lter (18) into a

dustbin.

u Replace the lter (18).

u Fit the cover (17).

u Slide the dust cassette (10) onto the tool and make sure

that it is securely located.

Special applications (g. H, I & J)

Cranked arm (g. H)

u Use section A for grooving or sanding in the centre of

workpieces and in conned areas.

u Use section B for curved surfaces.

Straight arm (g. I)

u Use the normal or narrow arms for general use, for slotting

and for making joints.

Narrow arm (g. J)

u Use the narrow arm for ner detail, for cutting and for carving.

Hints for optimum use

u Always hold the tool with both hands.

u Do not exert too much pressure on the tool.

u Regularly check the condition of the sanding belt (12).

Replace when necessary.

u Always sand with the grain of the wood.

u When sanding new layers of paint before applying another

layer, use extra ne grit.

u On very uneven surfaces, or when removing layers of

paint, start with a coarse grit. On other surfaces, start with

a medium grit. In both cases, gradually change to a ne

grit for a smooth nish.

u Consult your retailer for more information on available

accessories.

Maintenance

Your tool has been designed to operate over a long period of

time with a minimum of maintenance. Continuous satisfactory

operation depends upon proper tool care and regular cleaning.

Warning! Before performing any maintenance, switch off and

unplug the tool.

u Regularly clean the ventilation slots in your tool using a

soft brush or dry cloth.

u Regularly clean the motor housing using a damp cloth.

Do not use any abrasive or solvent-based cleaner.

Mains plug replacement (U.K. & Ireland only)

If a new mains plug needs to be tted:

u Safely dispose of the old plug.

u Connect the brown lead to the live terminal in the new plug.

u Connect the blue lead to the neutral terminal.

Warning! No connection is to be made to the earth terminal.

Follow the tting instructions supplied with good quality plugs.

Recommended fuse: 5 A.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Black Decker KA902E T1 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Black Decker KA902E T1

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info